vmware-nsx

Use this skill when the user needs to inspect or manage VMware NSX networking through NSX Manager — segments, Tier-0/Tier-1 gateways, NAT, static routes/BGP, and IP pools. Directly handles: list and inspect segments, gateways, NAT rules, routes and IP pools; check transport node, edge cluster and manager health; find a VM's segment. Changes (create/update/delete segments, Tier-1 gateways, NAT rules, static routes, IP pools, Tier-0 BGP) only when the user explicitly asks for that change. Use this skill for "create segment", "set up gateway", "create NAT rule", "check network health", "troubleshoot connectivity" when the context is explicitly NSX, NSX-T, or NSX Manager. Do NOT use for networking outside NSX, DFW firewall rules or security groups (use vmware-nsx-security), vSphere distributed port groups or host VMkernel adapters (use vmware-aiops), VM lifecycle (use vmware-aiops), or AVI/ALB load balancing (use vmware-avi). For multi-step workflows use vmware-pilot.

wei zhou@zw008

Install

openclaw skills install @zw008/vmware-nsx

VMware NSX

Disclaimer: This is a community-maintained open-source project and is not affiliated with, endorsed by, or sponsored by VMware, Inc. or Broadcom Inc. "VMware" and "NSX" are trademarks of Broadcom. Source code is publicly auditable at github.com/vmware-skills/VMware-NSX under the MIT license.

VMware NSX networking management — 33 MCP tools for segments, gateways, NAT, routing, and IPAM.

Domain-focused networking skill for NSX-T / NSX 4.x Policy API. Companion skills: vmware-nsx-security (DFW/firewall), vmware-aiops (VM lifecycle), vmware-monitor (read-only monitoring), vmware-storage (iSCSI/vSAN), vmware-vks (Tanzu Kubernetes), vmware-aria (metrics/alerts/capacity), vmware-avi (AVI/ALB/AKO), vmware-harden (compliance baselines). | vmware-pilot (workflow orchestration) | vmware-policy (audit/policy)

What This Skill Does

Category	Tools	Count	Read / Write
Segments	list, get details, create, update, delete	5	2R / 3W
Tier-0 Gateways	list, get details, BGP neighbors, configure BGP	4	3R / 1W
Tier-1 Gateways	list, get details, create, update, delete	5	2R / 3W
NAT	list rules, create rule, delete rule	3	1R / 2W
Static Routes	list, create, delete	3	1R / 2W
IP Pools	list, get usage, create pool, delete pool	4	2R / 2W
Fabric Inventory	transport zones, transport nodes, edge clusters	3	3R / 0W
Health	NSX alarms, transport node status, edge cluster status, manager status	4	4R / 0W
Troubleshooting	logical port status, VM-to-segment lookup	2	2R / 0W

Total: 33 tools (20 read-only + 13 write)

Quick Install

bash

uv tool install vmware-nsx-mgmt==1.9.0
vmware-nsx init      # guided setup: writes config + .env (chmod 600, password grep-safe), then verifies
vmware-nsx doctor

When to Use This Skill

List, create, or modify NSX segments (overlay / VLAN-backed)
Create or manage Tier-0 / Tier-1 gateways
Configure NAT rules (SNAT, DNAT, reflexive)
View or add static routes, check BGP neighbors
Manage IP pools and subnet allocations
Check NSX alarms, transport node health, edge cluster status
Find which segment a VM is connected to
Troubleshoot logical port status

Use it only when the request is explicitly about NSX (NSX-T / NSX 4.x, NSX Manager). Writes only on request: call a create/update/delete tool, NAT/route/IP-pool change, or Tier-0 BGP change only when the user has explicitly asked for that specific change — never as a side step of a read, health check, or troubleshooting task. Diagnose with read tools first and propose the change instead.

Use companion skills for:

Distributed firewall, security groups, DFW rules, IDS/IPS → vmware-nsx-security
vSphere distributed port groups, host VMkernel adapters → vmware-aiops
VM lifecycle, deployment, guest ops → vmware-aiops
vSphere inventory, health, alarms, events → vmware-monitor
Storage: iSCSI, vSAN, datastores → vmware-storage
Tanzu Kubernetes → vmware-vks
Load balancing, AVI/ALB, AKO, Ingress → vmware-avi

Related Skills — Skill Routing

User Intent	Recommended Skill
NSX networking: segments, gateways, NAT, routing, IPAM	vmware-nsx ← this skill
NSX security: DFW rules, security groups, IDS/IPS	vmware-nsx-security
Read-only vSphere monitoring, alarms, events	vmware-monitor
VM lifecycle, deployment, guest ops	vmware-aiops
vSphere distributed port groups, host VMkernel adapters	vmware-aiops
Storage: iSCSI, vSAN, datastores	vmware-storage
Tanzu Kubernetes (vSphere 8.x+)	vmware-vks
Aria Ops: metrics, alerts, capacity planning	vmware-aria
Multi-step workflows with approval	vmware-pilot
Compliance baselines (CIS / 等保 / PCI-DSS), drift detection, LLM remediation advisor	vmware-harden (`uv tool install vmware-harden`)
Load balancer, AVI, ALB, AKO, Ingress	vmware-avi (`uv tool install vmware-avi`)
Audit log query	vmware-policy (`vmware-audit` CLI)

Common Workflows

Create an App Network (Segment + T1 Gateway + NAT)

Pre-flight (judgment, not blind sequence):

Subnet conflict check: scan inventory list-segments and networking list-ip-pools for any overlap with the proposed CIDR. Overlapping subnets cause asymmetric routing or silent blackholing — NSX will not warn you.
Edge cluster capacity: confirm chosen --edge-cluster is healthy (inventory list-edge-clusters + health edge-cluster-status <id>) and not at SR (Service Router) limit. A fully-loaded edge cluster will accept the T1 creation but routing will fail.
T0 uplink: the parent T0 must already be configured with BGP/static routes upstream — otherwise SNAT works internally but external traffic goes nowhere.
NAT IP: --translated IP must be from a routable address pool announced by T0; using a random IP creates a half-working network.
Always --dry-run first — once a segment is attached to running VMs, deleting it requires detaching every port.

Steps:

vmware-nsx gateway create-tier1 app-t1 --name app-t1 --edge-cluster <ec-path> --tier0 <t0-path> --dry-run → review, then run for real
vmware-nsx segment create app-web-seg --name app-web-seg --tz <tz-overlay-path> --subnet <gw-cidr>
vmware-nsx nat create-rule --tier1 app-t1 --rule-id snat-1 --action SNAT --source <private-cidr> --translated <pub-ip>
Verify end-to-end: inventory list-segments, networking list-nat-rules app-t1, AND test with a VM attached to the new segment
On failure: a connection error or HTTP error prints a single teaching line (e.g. 403 → check NSX role privileges; 404 → run the matching list command for the exact ID). Run vmware-nsx doctor to verify connectivity and credentials, fix, and re-run the failed step — earlier completed steps are idempotent PUTs and safe to re-apply.

Check Network Health

Judgment: don't just enumerate health endpoints — correlate them. The order below maps cause to symptom: if manager is down, transport nodes will look down too (false positive); fix top-down.

vmware-nsx health manager-status — if any manager node is DEGRADED or DOWN, stop here and resolve before trusting downstream signals
vmware-nsx inventory list-transport-nodes then health transport-node-status <id> for any node not UP — flag nodes down ≥ 5 min; transient blips are normal
vmware-nsx inventory list-edge-clusters then health edge-cluster-status <id> — verify SR placement is balanced; one edge holding 80% of SRs is a single point of failure
vmware-nsx health alarms --severity HIGH (repeat with CRITICAL) — severity filter is exact-match, not "and above"
Cross-check with vmware-monitor for vSphere host events — a host losing connection to vCenter often masquerades as an NSX problem

Troubleshoot VM Connectivity

Judgment: connectivity failures happen at one of three layers. Identify which layer first, then drill — don't probe randomly.

Layer 1 — VM-to-segment: VM has no segment, wrong vNIC, or port admin-down → troubleshoot vm-segment + troubleshoot port-status
Layer 2 — segment-to-gateway: segment not attached to T1, T1 not connected to T0 → inventory get-tier1 shows no Tier-0 path
Layer 3 — gateway-to-upstream: T0 BGP/static missing or SNAT not configured → networking bgp-neighbors, networking list-nat-rules

Steps (stop as soon as the failing layer is identified):

Layer 1: troubleshoot vm-segment my-vm-01 → if no port, check vSphere vNIC binding first
Layer 1: troubleshoot port-status <segment-id> → admin-down or DFW-blocked? If DFW, jump to vmware-nsx-security
Layer 2: inventory get-tier1 app-t1 → Tier-0 path present and route advertisement enabled? If not, T1↔T0 link broken
Layer 3: networking bgp-neighbors tier0-gw → all neighbors ESTABLISHED? Flapping → upstream issue
Layer 3: networking list-nat-rules app-t1 → SNAT rule covers the source CIDR? Mis-typed CIDR is the most common cause

Multi-Target Operations

All commands accept --target <name> to operate against a specific NSX Manager from your config (default: the first target in config.yaml), e.g. vmware-nsx inventory list-segments --target nsx-prod.

Usage Mode

Scenario	Recommended	Why
Local/small models (Ollama, Qwen)	CLI	~2K tokens vs ~8K for MCP
Cloud models (Claude, GPT-4o)	Either	MCP gives structured JSON I/O
Automated pipelines	MCP	Type-safe parameters, structured output

MCP Tools (33 — 20 read, 13 write)

All MCP tools accept an optional target parameter to select which NSX Manager to connect to.

Category	Tool	Type	Description
Segment	`list_segments`	Read	List all segments with type, subnet, admin state, port count
	`get_segment`	Read	Get segment details including ports and subnet config
	`create_segment`	Write	Create overlay or VLAN segment with subnet and gateway
	`update_segment`	Write	Update segment properties (name, subnets, gateway link)
	`delete_segment`	Write	Delete a segment; refuses (listing port ids) while ports are attached
Tier-0 GW	`list_tier0_gateways`	Read	List Tier-0 gateways with HA mode and transit subnets
	`get_tier0_gateway`	Read	Get Tier-0 details: HA mode, failover, transit subnets
	`get_bgp_neighbors`	Read	List BGP neighbor sessions with state, ASN, prefixes
	`configure_tier0_bgp`	Write	Configure BGP (local AS, ECMP, inter-SR iBGP) on a Tier-0
Tier-1 GW	`list_tier1_gateways`	Read	List Tier-1 gateways with linked Tier-0 and route advertisement
	`get_tier1_gateway`	Read	Get Tier-1 details: Tier-0 link, route advertisement
	`create_tier1_gateway`	Write	Create Tier-1 gateway with edge cluster and Tier-0 link
	`update_tier1_gateway`	Write	Update Tier-1 properties (route advertisement, Tier-0 link)
	`delete_tier1_gateway`	Write	Delete a Tier-1 gateway; refuses (listing blocking ids) while segments, NAT rules, routes, interfaces or VPN / DNS / LB services remain
NAT	`list_nat_rules`	Read	List NAT rules on a Tier-1 gateway
	`create_nat_rule`	Write	Create SNAT/DNAT/reflexive NAT rule on a gateway
	`delete_nat_rule`	Write	Delete a NAT rule
Static Routes	`list_static_routes`	Read	List static routes on a Tier-1 gateway
	`create_static_route`	Write	Add a static route with network and next-hop
	`delete_static_route`	Write	Remove a static route
IP Pools	`list_ip_pools`	Read	List IP pools with usage summary
	`get_ip_pool_usage`	Read	Show allocation usage for a pool
	`create_ip_pool`	Write	Create a new IP address pool with allocation ranges
	`delete_ip_pool`	Write	Permanently delete an IP address pool
Fabric	`list_transport_zones`	Read	List transport zones with type (OVERLAY/VLAN)
	`list_transport_nodes`	Read	List transport nodes with node type and status
	`list_edge_clusters`	Read	List edge clusters with member count and deployment type
Health	`list_nsx_alarms`	Read	List active NSX alarms filtered by severity
	`get_transport_node_status`	Read	Transport node connectivity and config status
	`get_edge_cluster_status`	Read	Edge cluster member status and failover config
	`get_nsx_manager_status`	Read	NSX Manager cluster health and node roles
Troubleshoot	`get_logical_port_status`	Read	Realized state of all ports on a segment
	`get_segment_port_for_vm`	Read	Find which segment a VM is connected to by display name

Write tools require explicit parameters and are audit-logged. Dry-run preview (--dry-run) is a CLI feature; MCP write tools execute directly, with no confirmation step of their own — call one only after the user has explicitly asked for that change.

List results are envelopes — read `truncated` before you summarise

Every list-returning tool above returns {items, returned, limit, total, truncated, hint}, not a bare array. Rows live under items: empty items with truncated: false means the query genuinely matched nothing — report that, not a tool failure. truncated: true means items is not the whole collection — never call it complete. It does not mean more rows can be fetched: it stays true on the last page. Page with next_offset, stopping when it is null; hint says which situation you are in. Field semantics, total sourcing, and an example payload: references/capabilities.md.

Local & Small Models

Running with local or small models? See references/agent-guardrails.md for explicit operating rules that keep tool calls reliable.

CLI Quick Reference

bash

# Inventory (read-only)
vmware-nsx inventory list-segments [--target <name>]
vmware-nsx inventory get-segment <segment-id>
vmware-nsx inventory list-tier0s
vmware-nsx inventory get-tier0 <tier0-id>
vmware-nsx inventory list-tier1s
vmware-nsx inventory get-tier1 <tier1-id>
vmware-nsx inventory list-transport-zones
vmware-nsx inventory list-transport-nodes
vmware-nsx inventory list-edge-clusters

# Networking (read-only)
vmware-nsx networking list-nat-rules <tier1-id>
vmware-nsx networking bgp-neighbors <tier0-id>
vmware-nsx networking list-static-routes <tier1-id>
vmware-nsx networking list-ip-pools
vmware-nsx networking ip-pool-usage <pool-id>

# Segment management (write; full option lists in references/cli-reference.md)
vmware-nsx segment create <id> --name <name> --tz <tz-path> [--vlan|--subnet] [--dry-run]
vmware-nsx segment update <id> [--name|--subnet] [--dry-run]
vmware-nsx segment delete <id> [--dry-run]

# Gateway management (write)
vmware-nsx gateway create-tier1 <id> --name <name> [--tier0|--edge-cluster] [--dry-run]
vmware-nsx gateway update-tier1 <id> [--name|--tier0|--advertise] [--dry-run]
vmware-nsx gateway delete-tier1 <id> [--dry-run]
vmware-nsx gateway configure-tier0-bgp <tier0-id> --local-as <asn> [--ecmp] [--dry-run]

# NAT (write)
vmware-nsx nat create-rule --tier1 <id> --rule-id <id> --action SNAT --source <cidr> --translated <ip> [--dry-run]
vmware-nsx nat delete-rule --tier1 <id> --rule-id <id> [--dry-run]

# Static routes (write)
vmware-nsx route create-static --tier1 <id> --route-id <id> --network <cidr> --next-hop <ip> [--dry-run]
vmware-nsx route delete-static --tier1 <id> --route-id <id> [--dry-run]

# IP pools (write)
vmware-nsx ip-pool create <pool-id> --name <name> --start <ip> --end <ip> --cidr <cidr> [--dry-run]

# Health & Troubleshooting (read-only)
vmware-nsx health alarms [--severity CRITICAL]
vmware-nsx health transport-node-status <node-id>
vmware-nsx health edge-cluster-status <cluster-id>
vmware-nsx health manager-status
vmware-nsx troubleshoot port-status <segment-id>
vmware-nsx troubleshoot vm-segment <vm-display-name>

# Diagnostics
vmware-nsx doctor [--skip-auth]

Full CLI reference with all options and output formats: see references/cli-reference.md

Troubleshooting

"Segment not found" when querying

Segment display names and Policy API IDs can differ. Use vmware-nsx inventory list-segments to get the exact ID. The Policy API uses the segment id field, not display_name. Common mistakes: using the display name with spaces instead of the hyphenated ID.

NAT rule creation fails with "gateway not found"

NAT rules are created on Tier-1 gateways (or Tier-0 for some topologies). Verify the gateway name with vmware-nsx inventory list-tier1s. The gateway must have an edge cluster assigned for NAT to function.

BGP neighbor shows "Connect" or "Active" state

The BGP session is not established. Common causes:

Peer IP unreachable from the edge node — check physical uplinks and VLAN config
ASN mismatch — compare local and remote ASN in bgp-neighbors output
Firewall blocking TCP 179 — check edge node firewall rules (not NSX DFW)
MD5 password mismatch — verify authentication settings on both sides

Transport node status "degraded"

A transport node in degraded state has partial connectivity. Steps:

Check vmware-nsx health transport-nodes for the specific failure reason
Common cause: tunnel endpoint (TEP) unreachable — verify underlay MTU (minimum 1600 for Geneve)
Check NTP sync between NSX Manager and transport nodes
If recently upgraded, verify the host switch config matches NSX Manager expectations

"Password not found" error

The password environment variable is missing. Variable names follow the pattern VMWARE_NSX_<TARGET_NAME_UPPER>_PASSWORD where hyphens become underscores. Example: target nsx-prod needs VMWARE_NSX_NSX_PROD_PASSWORD. Check your ~/.vmware-nsx/.env file.

Safety

Read-heavy: 20 of 33 tools are read-only (list, get, status, health, troubleshoot)
Audit logging: All operations logged to ~/.vmware/audit.db (SQLite WAL, via vmware-policy) with timestamp, user, target, operation, parameters, and result
Double confirmation: CLI write commands require two separate confirmation prompts before executing
Dry-run mode: All CLI write commands support --dry-run to preview API calls without executing (MCP write tools execute directly and are audit-logged)
Dependency checks: Segment delete refuses while ports are attached. Tier-1 delete first checks (read-only) for attached or Tier-1-scoped segments, NAT rules, static routes, service interfaces, extra locale-services, IPsec / L2 VPN services, a DNS forwarder and attached LB services; while any remain it refuses, deletes nothing and lists their ids (--dry-run runs the same check). Only a clean gateway has its default locale-service removed and is then deleted
Input validation: resource IDs restricted to letters, digits, - and _; NAT action checked against the allowed set; required fields checked (translated address for SNAT/DNAT/REFLEXIVE, CIDR + ranges per IP-pool subnet). CIDR/IP syntax and gateway existence are not checked client-side — they are left to NSX Manager's own API validation
Prompt injection defense: NSX object names returned from the API are sanitized via _sanitize() — strips control characters, truncates to 500 chars
Credential safety: Passwords loaded only from environment variables (.env file), never from config.yaml
No firewall operations: Cannot create, modify, or delete DFW rules, security groups, or IDS/IPS policies — that scope belongs to vmware-nsx-security

Setup

bash

uv tool install vmware-nsx-mgmt==1.9.0
vmware-nsx init      # writes ~/.vmware-nsx/config.yaml + .env (chmod 600), then verifies
vmware-nsx doctor

All tools are automatically audited via vmware-policy. Audit logs: vmware-audit log --last 20

Full setup guide with multi-target config, MCP server setup, and Docker: see references/setup-guide.md

Architecture

text

User (natural language)
  |
AI Agent (Claude Code / Goose / Cursor)
  | reads SKILL.md
vmware-nsx CLI or MCP server (stdio transport)
  | NSX Policy API (REST/JSON over HTTPS)
NSX Manager
  |
Segments / Gateways / NAT / Routes / IP Pools / Transport Nodes

Audit & Safety

All operations are automatically audited via vmware-policy (@vmware_tool decorator):

Every tool call logged to ~/.vmware/audit.db (SQLite, framework-agnostic)
Policy rules enforced via ~/.vmware/rules.yaml (deny rules, maintenance windows, risk levels)
Risk classification: each tool tagged as low/medium/high/critical
View recent operations: vmware-audit log --last 20
View denied operations: vmware-audit log --status denied

vmware-policy is automatically installed as a dependency — no manual setup needed.

License

MIT — github.com/vmware-skills/VMware-NSX

vmware-nsx

Install

VMware NSX

What This Skill Does

Quick Install

When to Use This Skill

Related Skills — Skill Routing

Common Workflows

Create an App Network (Segment + T1 Gateway + NAT)

Check Network Health

Troubleshoot VM Connectivity

Multi-Target Operations

Usage Mode

MCP Tools (33 — 20 read, 13 write)

List results are envelopes — read truncated before you summarise

Local & Small Models

CLI Quick Reference

Troubleshooting

"Segment not found" when querying

NAT rule creation fails with "gateway not found"

BGP neighbor shows "Connect" or "Active" state

Transport node status "degraded"

"Password not found" error

Safety

Setup

Architecture

Audit & Safety

License

Related skills

List results are envelopes — read `truncated` before you summarise