File Writer

Safely write or update large files over 5000 bytes by reading, incrementally editing small sections, verifying each change, and using fallback recovery methods.

Safe file writing strategy for large files to avoid truncation issues.

When to Use

• Writing files larger than 5000 bytes
• Updating existing files with significant changes
• Modifying specific sections of large files
• Previous write operations were truncated
• Need to ensure file integrity

Problem Analysis

Why Files Get Truncated

Large file writes can fail due to:

1. Tool limitations - write tool may have byte limits per operation
2. Network limits - Large file transfers may be truncated during transmission
3. System limits - OpenClaw may have size limits on single operations

Safe Size Thresholds

Operation	Safe Size	Risk Level
write new file	< 2000 bytes	✅ Safe
write new file	2000-5000 bytes	⚠️ Moderate
write new file	> 5000 bytes	❌ High risk
edit modification	< 500 bytes	✅ Safe
edit modification	500-1000 bytes	⚠️ Moderate
edit modification	> 1000 bytes	❌ High risk

Safe Writing Strategy

Step 1: Read Current State

Before making changes, read the current file state:

bash

# Read the file to understand current structure
read /path/to/file.md

# For large files, read specific sections
read /path/to/file.md --offset 100 --limit 50

Purpose:

• Understand file structure
• Identify exact text to replace `- Determine modification points

Step 2: Use Edit Tool for Precise Modifications

For small to medium changes, use edit tool:

markdown

Use `edit` tool with:
- `oldText`: Exact text to replace (must match exactly)
- `newText`: New text to replace with
- `file_path`: Path to the file

Best Practices:

• Keep modifications under 500 bytes
• Match oldText exactly (including whitespace)
• Use unique text markers for large sections
• Verify oldText exists before editing

Step 3: Verify Results

After each modification, verify the result:

bash

# Check file line count
wc -l /path/to/file.md

# Read modified section
read /path/to/file.md --offset <start> --limit <lines>

# Verify file ends correctly
read /path/to/file.md --offset -10

Success Criteria:

• File size increased as expected
• Modified section contains new content
• File ends correctly (not truncated)
• No syntax errors (for code files)

Step 4: Repeat Until Complete

For large multi-section updates:

1. Modify one section at a time
2. Verify each modification
3. Proceed to next section
4. Repeat until all changes complete

Fallback Strategies

Strategy 1: Split Large Writes

If write tool fails for large content:

markdown

Split content into chunks:

1. Write first chunk (header + section 1)
2. Verify and append section 2
3. Verify and append section 3
4. Continue until complete

Strategy 2: Use Unique Markers

For complex modifications, use unique markers:

markdown

In source file:
<!-- SECTION_START: configuration -->
[existing content]
<!-- SECTION_END: configuration -->

Edit operation:
oldText: "<!-- SECTION_START: configuration -->\n[existing content]\n<!-- SECTION_END: configuration -->"
newText: "<!-- SECTION_START: configuration -->\n[new content]\n<!-- SECTION_END: configuration -->"

Strategy 3: Incremental Build

For creating new large files:

markdown

1. Create file with basic structure
2. Add sections one by one using edit
3. Verify after each addition
4. Final verification

Strategy 4: Backup and Restore

For critical file modifications:

bash

# Create backup before modification
cp /path/to/file.md /path/to/file.md.backup

# Attempt modification
# ... (write or edit operation)

# If modification fails, restore
cp /path/to/file.md.backup /path/to/file.md

Error Recovery

Edit Tool Fails

Symptom: "Could not find exact text in file"

Causes:

• oldText doesn't match exactly
• Whitespace differences (spaces vs tabs)
• File already modified
• Text doesn't exist in file

Solutions:

1. Re-read the file to get exact content
2. Use unique markers for large sections
3. Match whitespace exactly (copy from file read)
4. Use smaller oldText for more precise matching

Write Tool Truncates

Symptom: File ends abruptly or is incomplete

Solutions:

1. Use edit tool instead of write
2. Split content into smaller chunks
3. Write incrementally (section by section)
4. Verify file size after each operation

File Corruption

Symptom: File has syntax errors or invalid content

Solutions:

1. Restore from backup
2. Re-read and re-verify
3. Use incremental build strategy
4. Validate syntax after each modification

Examples

Example 1: Adding Section to Large File

markdown

Step 1: Read file to find insertion point
read /path/to/large-file.md --offset 50 --limit 10

Step 2: Use edit to add new section
edit:
  file_path: /path/to/large-file.md
  oldText: "## Existing Section\n\nContent here"
  newText: "## Existing Section\n\nContent here\n\n## New Section\n\nNew content"

Step 3: Verify
read /path/to/large-file.md --offset 50 --limit 20

Example 2: Creating Large New File

markdown

Step 1: Create basic structure
write:
  file_path: /path/to/new-file.md
  content: "# Title\n\n## Section 1\n\nContent 1"

Step 2: Add sections incrementally
edit:
  file_path: /path/to/new-file.md
  oldText: "Content 1"
  newText: "Content 1\n\n## Section 2\n\nContent 2"

Step 3: Verify
wc -l /path/to/new-file.md

Example 3: Replacing Large Section

markdown

Step 1: Read file to find exact text
read /path/to/file.md

Step 2: Use unique markers
edit:
  file_path: /path/to/file.md
  oldText: "<!-- START: old-section -->\n[old content]\n<!-- END: old-section -->"
  newText: "<!-- START: old-section -->\n[new content]\n<!-- END: old-section -->"

Step 3: Verify
read /path/to/file.md | grep "new content"

Best Practices

1. Always read before editing - Understand current state
2. Use edit for modifications - More precise than write
3. Keep changes small - Under 500 bytes per edit
4. Verify after each operation - Don't batch operations
5. Use unique markers - For complex modifications
6. Create backups - For critical files
7. Handle errors gracefully - Provide recovery strategies
8. Test incrementally - Verify each step

Decision Tree

text

Need to write/update file?
├─ New file?
│  ├─ < 2000 bytes?
│  │  └─ Use write tool
│  └─ > 2000 bytes?
│     └─ Use incremental build strategy
└─ Existing file?
   ├─ Small change (< 500 bytes)?
   │  └─ Use edit tool
   ├─ Medium change (500-1000 bytes)?
   │  └─ Use edit with unique markers
   └─ Large change (> 1000 bytes)?
      └─ Use incremental edit strategy

Quick Reference

Task	Tool	Strategy
Create small file	write	Direct write
Create large file	write + edit	Incremental build
Small modification	edit	Direct edit
Medium modification	edit	Edit with markers
Large modification	edit	Incremental edit
Replace section	edit	Unique markers
Append content	edit	Edit end of file