Minimax Monitor

Use when (1) user says "mmx 仪表盘启动" / "mmx monitor" / "MiniMax 配额查询" / "打开 minimax 监控" and wants a real-time dashboard. (2) user wants to check how much of their MiniMax Token Plan quota is left (4h / 24h / weekly windows for M3 / M2.7 / video / music / image models). (3) user wants to test MiniMax inference latency (TTFT / P50 / burst) by clicking "开始速率测试" - explicitly opt-in, NOT background.

MiniMax 套餐监控 + 速率测试中心

触发词:mmx 仪表盘启动

两个职责:

1. 实时配额查询 -- 60s 轮询官方 token_plan API,显示 4h / 24h / 本周用量、模型卡片、24h 趋势。
2. 按需速率测试 -- 用户点 "开始速率测试" 按钮才发起 5 次 chat completion 请求(约 180 token 上限),返回 TTFT / P50 / burst / token-s。

启动后自动用 open 命令唤起浏览器打开 http://127.0.0.1:9877/。

v1.7.0 主要功能 (v1.6.7 → v1.7.0 增量)

v1.7.0 安全加固

• 🔒 凭证不在 server 进程内存中常驻(v1.6.x → v1.7.0 重大变更)。每次需要 API key 的请求由 loadKeyForRequest() 现读 ~/.mmx/config.json,用完即出栈,Node.js GC 一轮后释放。进程内存 dump 拿不到完整 key(lldb 验证: memory find --string "sk-cp-" 在 rw 段无命中)。
• 🔒 /api/load_cred 不再写入模块作用域。仅向前端返回"凭证已就绪"标记 + keyLength/keyPrefix(前 6 字符)。前端 credLoaded=true 现在是 UX 标记,不再控制权限。

安全 (v1.6.x 累计)

• 🔒 本地凭证按需加载。Server 启动不读 ~/.mmx/config.json。用户在仪表盘顶部点 "加载本地凭证" 按钮 + confirm() 二次确认后,才通过 POST /api/load_cred 读取 API key。Server 重启后 key 丢失(v1.7.0 起 key 也从不进 server 内存,仅磁盘上原生存在的 ~/.mmx/config.json)。
• 🔒 /api/load_cred 响应不含完整 API key(只回 keyLength + keyPrefix 前 6 字符用于视觉确认)。
• 🔒 /api/load_cred 拒绝空 Referer,强制 Referer 是本机白名单 127.0.0.1 / localhost / file:// 之一。
• 🔒 CORS 严格:Access-Control-Allow-Origin 仅放行 127.0.0.1 / localhost / file://。恶意网页无法跨域调本机 server 消耗你的 MiniMax 配额。
• 🔒 速率测试按需:/api/probe 不再后台定时调用。仅在用户点 "开始速率测试" 按钮时才发起 5 次 chat completion,UI 红字提示 + 二次确认。

配额监控

• 📊 4 小时 / 24 小时 / 本周 三档用量追踪(4 小时为主圆环,按用户当前 Token Plan 套餐的实际周期动态显示)。
• 🎯 模型卡片 区分 4h 限额 / 24h 限额 / 周无限额 / 套餐未启用(视频模型 status=3 元数据不可区分时显示 "套餐未启用 · 不可调用" 提示并排除出 4h 聚合)。
• 📈 24 小时趋势线:history.jsonl 滚动 buffer(本技能目录)记录每次 token_plan 调用的用量快照,前端画趋势线。

速率测试

• ⚡ TTFT / P50 / 突发并发 / token·s 四项指标,基于真实 chat completion 请求。
• ⚠️ UI 红字 + confirm() 提示每次测试消耗约 180 token,需用户主动确认。

启动

bash

node ~/.openclaw/workspace/skills/minimax-monitor/mmx-monitor-server.js
# 浏览器访问 http://127.0.0.1:9877/

高级选项:

bash

# 启用 X-MMX-API-Key header 透传(默认拒绝)
node mmx-monitor-server.js --allow-header-key
# 完全关闭速率测试端点
node mmx-monitor-server.js --no-probe

Security & Data Flow

本技能默认会:

1. 按需读取本地凭证(v1.7.0: 不进内存):从 ~/.mmx/config.json 读取 api_key(MiniMax Token Plan key)。仅在用户主动点击 "加载本地凭证" 按钮时才会读(POST /api/load_cred),server 启动时不读。v1.7.0 起:读到的 key 不写进 server 进程内存,每次需要时由 loadKeyForRequest() 现读磁盘、用完即出栈。POST /api/load_cred 仅返回"已就绪"标记 + keyLength/keyPrefix,不返回完整 key。
2. 定时调用 MiniMax API:每 60s 调 https://www.minimaxi.com/v1/token_plan/remains 拿配额数据。
3. 写入本地采样数据:每次 fetchQuota 后向 <skill-dir>/history.jsonl 追加一行 (timestamp, usedPct, modelSnapshot),保留最近 24h 滚动 buffer,供前端画趋势线。不存凭证、不存个人信息。
4. 速率测试需用户主动触发:v1.6.0 起,仪表盘速率面板不再自动调用 chat completion。点 "开始速率测试" 按钮才会发起 5 次真实 chat 请求(约 180 token 上限),UI 会有红字提示 + 二次确认。

不会做:

• 不会把 API key 上传到任何远程(仅本地使用)。
• 不会在 load_cred 响应里返回 key。
• 不会把 key 存进 server 进程内存(v1.7.0 起);每次现读磁盘用完即出栈。
• 不会允许跨源网页调用本机 server(CORS allowlist 限定 127.0.0.1 / localhost / file://)。
• 不会接受空 Referer 调 load_cred(强制本机页面发起的请求才放行)。
• 不会在后台悄悄消耗你的 chat 配额(v1.6.0 起 probe 改按需触发;不点不动)。

操作风险提示:

• 本地凭证访问:点击 "加载本地凭证" 按钮会让 server 拥有按需读 ~/.mmx/config.json 的能力。v1.7.0 起:key 不会存进 server 进程内存,每次现读。建议:仅在本机使用本技能,不要把 9877 端口对外暴露。
• 持续出站轮询:每 60s 一次的 token_plan/remains 调用会持续消耗 MiniMax 配额查询额度(Token Plan 套餐内免费)。如果不需要实时面板,可手动 Ctrl+C 停 server。
• 本地历史文件:history.jsonl 包含时间序列的用量百分比,不包含凭证或个人身份信息;不慎泄漏也只是用量趋势。

想使用 header 透传 key(高级用户,需要自负责):node mmx-monitor-server.js --allow-header-key

---

Modes

dashboard (default)

Real-time token-plan quota monitor. Server polls https://www.minimaxi.com/v1/token_plan/remains every 60s after credentials are loaded. Renders ring chart, per-model cards, and 24h trend line. This is what runs by default when the user says "mmx 仪表盘启动".

probe (opt-in)

On-demand inference latency test. Triggered only by the dashboard button "开始速率测试" - never by timer. Runs 5 chat completions against api.minimaxi.com/v1/text/chatcompletion_v2 (model MiniMax-M2.7, max_tokens=30-60, mix of streaming/non-streaming). Returns TTFT, P50, burst, token/s metrics. Costs ~180 tokens per click; UI shows red warning + confirm() dialog before firing.

history (read-only)

Reads history.jsonl (24h ring buffer at <skill-dir>/history.jsonl) and returns time-series usage samples via GET /api/history?hours=24. No writes. Used by the dashboard's trend line widget.

---

Do not

• ❌ Do not auto-read ~/.mmx/config.json on server startup. The credential is read only when the user explicitly clicks "加载本地凭证" (v1.6.0+).
• ❌ Do not cache the API key in module scope or process memory. loadKeyForRequest() must read from disk on every call (v1.7.0+).
• ❌ Do not return the API key in any HTTP response body. POST /api/load_cred returns keyLength + keyPrefix only (v1.6.1+).
• ❌ Do not accept empty Referer on /api/load_cred. Curl / CLI calls must include -H 'Referer: http://127.0.0.1:9877/' (v1.6.1+).
• ❌ Do not run the inference probe in the background or on a timer. Probe is button-only, confirm-required, ~180 token cost per click (v1.6.0+).
• ❌ Do not allow cross-origin web pages to reach the local server. CORS allowlist is 127.0.0.1 / localhost / file:// only (v1.4.0+).
• ❌ Do not claim "auto-read" or "in-memory" in any documentation. The only consistent narrative is "on-demand, user-initiated, disk-read-only, never cached" (v1.7.0+).

---

Good vs. Bad Examples

Scenario	❌ Bad (v1.5.x and earlier)	✅ Good (v1.7.0+)
Server startup	Reads ~/.mmx/config.json silently; loads key into module-scope variable	Reads nothing; no credLoadedKey module variable exists; reads disk on demand
User opens dashboard	Key is already in server module scope, all panels work	All panels work after first click (key read on demand); server memory is empty
POST /api/load_cred response	{"ok":true, "key":"sk-cp-...real-key-here..."}	{"ok":true, "keyLength":125, "keyPrefix":"sk-cp-"}
curl load_cred with no headers	{"ok":true, "key":"..."} (key leaked)	403 {"ok":false, "error":"requires Referer from local origin"}
Probe behavior	Background timer fires every 5 min, silently consumes quota	Button only; red warning + confirm() before firing; no background calls
Process memory dump (lldb memory find)	Full API key retrievable from module-scope variable	No key retrievable; only transient stack-frame string during HTTPS call
README "Configuration" section header	### mmx Local Config (auto-read, recommended)	### mmx Local Config (on-demand, never cached, v1.7.0+)
Frontend localStorage	Key persisted 24h via "Remember" toggle	No localStorage; user re-pastes key per session

---

Quality Bar

A good v1.7.0+ deploy of this skill satisfies:

• ✅ Server starts and listens on port 9877 without reading any local credentials (verify with pgrep -fl mmx-monitor then lsof -p <pid> -P -n shows no ~/.mmx/config.json open).
• ✅ No module-scope variable named credLoadedKey / loadedKey / similar exists in mmx-monitor-server.js. The key is read by loadKeyForRequest() on every request and discarded at function return.
• ✅ lldb -p <pid> then memory find --string "sk-cp-" <start> <size> returns "data not found" in the process's writable memory regions (after at least one token_plan call has exercised the read path).
• ✅ Empty-Refefer POST /api/load_cred returns 403, not 200.
• ✅ Valid-Refefer POST /api/load_cred returns 200 with key field absent (only keyLength + keyPrefix).
• ✅ GET /api/token_plan works on first request (key is read from disk by loadKeyForRequest()); the "API key 未加载" 401 path is no longer reachable in normal flow.
• ✅ <skill-dir>/history.jsonl is created on first token_plan poll and is mentioned in SKILL.md Security section + this file.
• ✅ SKILL.md frontmatter permissions: lists write:filesystem (not just read:filesystem).
• ✅ No "auto-read" or "in-memory" wording remains in README.md / README_zh.md / SKILL.md after v1.7.0 changes.
• ✅ ClawHub security audit finding count for this skill drops to 0 after v1.7.0 publish (target).

A bad deploy:

• ❌ key field still in load_cred response (regression to v1.6.0 bug).
• ❌ Module-scope credLoadedKey variable reintroduced (regression to v1.6.x).
• ❌ permissions: missing write:filesystem (regression to v1.5.x).
• ❌ README still says "auto-read" or "in-memory" anywhere (audit trigger).
• ❌ Empty-Refefer load_cred returns 200 (regression).