grill-tank-fuel-forecaster
Use when a propane grill cook is planned and tank level is unknown or suspect — bathroom-scale weigh-in with tare (TW stamp) subtraction giving lb and grams of fuel left and hours of burn to a 20% reserve floor at your grill's total lit BTU (21,600 BTU/lb math, 1 lb = 453.6 g, the 424 g/lb and 4.24 lb/gal trap), cook-session consumption with preheat and duty-cycle corrections, party planning with guest-count batching, re-fire margin and GO/NO-GO scale thresholds, and cage-exchange vs refill economics ($/lb with 15 lb exchange fills vs 20 lb refills, annual cost at real usage) plus the safety rails — 5-10 ft clearance, soapy-water leak checks, never store or check leaks indoors.
Grill Tank Fuel Forecaster
It's Saturday, 18 guests arrive in three hours, and the tank gauge — there is no tank gauge. Propane cylinders have no usable fuel meter; the only honest reading is mass on a bathroom scale. Meanwhile the marketing says "30 cookouts per tank," the exchange cage quietly hands you 15 lb for a 20 lb price, and every grill fire season starts with a tank too close to the siding. This skill turns a scale reading and a rating plate into numbers you can cook to: hours left, sessions per tank, the minimum scale weight for tonight's party, and whether exchange or refill is burning ~$470/yr.
When to Use
- "How much gas is left?" — weigh the tank, get lb/g remaining and hours of cook time to a 20% reserve floor at your actual lit BTU
- Pre-party GO/NO-GO: is THIS tank enough for 3 hours × 8 guests, with re-fire margin, or do you swap now?
- Estimating how long a tank lasts your routine (weeks per tank, tanks/yr) before the season starts
- Deciding exchange cage vs refill station: real $/lb, the 15 lb exchange-fill gotcha, and what swapping early costs you in surrendered fuel
- Buying/sizing a grill: translating "48,000 BTU" into lb/hr you'll actually feed it
- Setting up the safe operating baseline: clearance, leak checks, storage, recert dates
The Method
# 1. Weigh-in: scale reading → fuel left and hours to the reserve floor
python3 scripts/tank_forecast.py weigh --tare-lb 17 --current-lb 15.2 \
--burner-btu 36000
# → 15.2 − 17 is negative → net-input mode: 15.2 lb fuel? No — reading
# <= tare is interpreted as already-tare-subtracted NET fuel.
# For a tank ON the scale: --current-lb 32.0 → 15.0 lb left.
# 2. Your routine: how long does a tank last, how many per year
python3 scripts/tank_forecast.py session --burner-btu 36000 \
--hours 2.5 --sessions-week 2
# Thermostated/grill-marker? add --duty 0.6 and --preheat-min 10.
# 3. Party plan: minimum scale weight before ignition, GO/NO-GO vs yours
python3 scripts/tank_forecast.py plan --cook-hours 3 --guests 8 \
--current-lb 31.4
# 16 guests on an 8-serving grate → 2 batches → 2× cook time.
# 4. Exchange vs refill at YOUR prices and usage
python3 scripts/tank_forecast.py compare --exchange-cost 26 \
--refill-cost 19 --hours 2.5 --sessions-week 2
Add --json to any command for machine-readable output.
The Numbers That Drive Everything
| Constant | Value | Why it matters |
|---|---|---|
| BTU per lb propane | 21,600 | BTU rating plate → lb/hr clock |
| 1 lb in grams | 453.6 | 424 g is lb/gallon garbled, 7% off |
| Liquid propane density | 4.24 lb/gal | 20 lb fill ≈ 4.7 gal |
| Tare (TW), steel 20 lb | ~17 lb | reading − TW = fuel left |
| Full tank on the scale | ~37 lb | 15 lb exchange fills read ~32 lb |
| Reserve floor | 20% of fill | output falls off below it; never plan past it |
Burn rates at common configurations (all burners lit, full output):
| Grill | Total BTU | lb/hr | Full-tank hours (to reserve) |
|---|---|---|---|
| Portable/tabletop | 10,000 | 0.46 | 34.8 hr |
| 2-burner | 26,000 | 1.20 | 13.3 hr |
| 3-burner (default) | 36,000 | 1.67 | 9.6 hr |
| 4-burner | 44,000 | 2.04 | 7.8 hr |
| 6-burner + rear | 66,000 | 3.06 | 5.2 hr |
Full burn-rate table with side burners and per-cook costs:
references/tank-math.md §2.
Common Pitfalls
- Believing the "30 cookouts per tank" sticker. That's one burner,
short cooks, no preheat. A 3-burner at 2.5 hr × 2/wk burns ~9 lb/wk
— a tank every 2 weeks, not every season. Run
sessionwith your real numbers. - Reading 424 g as grams-per-pound. That's 4.24 lb/gal with the units mangled; a pound is 453.6 g. Scales that show grams need the right constant or you're off 7%.
- Trusting the exchange cage's "full." Exchange tanks are filled
to ~15 lb, not 20 — you pay ~$1.73/lb vs ~$0.95/lb refilled, and
swapping early gifts them your remaining fuel.
compareruns your actual prices. - Assuming tare is 17 lb. Aluminum cylinders run 13-14 lb; steel varies 16.6-18.0. Read the TW stamp on the collar — an assumed tare is a ±1 lb fuel error before you start.
- Planning to empty instead of to the reserve. Output sags badly below ~20%, cold weather makes it worse, and a flameout mid-party is the failure mode. All hours here stop at the floor.
- Summing the rating plate's max BTU as your draw. If two of four burners run at medium, you're at ~25% of plate. Sum what's lit, apply duty ~0.6 for medium — otherwise you'll carry backup tanks forever.
- Weighing with a hot or frosty tank. Condensation adds ~0.1-0.3 lb; a hot tank after a cook reads high from... nothing, actually, but the scale drifts. Weigh cold and dry, before cooking.
- Checking for leaks with a flame. Soapy water only. The lighter "test" is how garages disappear — see safety below.
Safety — Non-Negotiable
- 5-10 ft clearance, outdoors only. ≥5 ft from siding/eaves/rails, never under an awning or in a garage with the door open.
- Never store tanks indoors — spare cylinders live outside, upright, away from entries. Propane pools at floor level and finds pilots.
- Leak check = soapy water, never a flame. Bubbles at the fitting mean shut the valve, reseat, retest. New hose or post-swap, every time.
- Transport upright, valve closed, never in a hot parked car.
- Recert: collar date + 12 years (then 5-year requal). Exchanges take anything; refillers check.
Full rules with incident patterns: references/tank-math.md §6.
Verification Checklist
- TW stamp read off the collar (not assumed 17 lb)
- Scale reading taken cold/dry, tank off the grill
- Burner BTU = sum of burners actually lit (plate is max-everything)
- Duty cycle set (1.0 wide-open manual, 0.6-0.7 thermostated/medium)
- All hour figures are to the 20% reserve, not to empty
- Exchange fills modeled at 15 lb, refills at 20 lb
- Party plan includes margin + reserve, not just raw cook fuel
- Tank clearances, storage, and leak-check rules from §6 reviewed before the season starts
References
references/tank-math.md— BTU derivations, the full burn-rate table by grill class, weight-based fuel semantics (453.6 g/lb vs the 424 trap), the cook-session consumption model, exchange vs refill economics with worked annual numbers, and the safety rails.
- Downloads
- Security audit
- Pass
- Last updated
- 1mo ago
- Current version
- v1.0.0
- License
- MIT-0
