basement-dampness-doctor
Use when a basement or crawl space smells musty, shows mold, efflorescence, or wet spots — or when sizing a dehumidifier. Separates condensation from liquid-water intrusion using dew-point physics (deep-soil wall temperature model), ranks the 10 classic moisture sources, sizes dehumidifier capacity in pints/day, and analyzes humidity logs.
Basement Dampness Doctor
Overview
Every damp basement gets one of two wrong treatments: a dehumidifier bought for a water problem, or foundation waterproofing sold for an air problem. The physics that separates them is simple and checkable: moisture condenses on any surface colder than the air's dew point. In summer, basement walls sitting against 13–17°C deep soil chill the air below its dew point — mold on organic surfaces with a dusty-white absence of stains on the concrete = condensation. Efflorescence (white salt crystals), staining in vertical streaks, or puddles = liquid water moving through/along the foundation — and a dehumidifier will not fix that.
This skill computes dew point (Magnus formula), estimates the wall-surface temperature from a deep-soil seasonal lag model, renders a CONDENSATION vs LIQUID verdict, ranks the classic sources (downspouts, grading, window wells, dryer venting...), and sizes dehumidifier capacity honestly (AHAM pints/day by area × dampness class), plus a humidity-log analyzer.
When to Use
- Musty smell, mold spots, peeling paint, "sweating" walls or floor in a basement/crawl space
- Deciding between a dehumidifier, a fan, and calling a waterproofing contractor
- Sizing/buying a dehumidifier (how many pints? drain vs bucket? energy cost?)
- Reviewing a contractor's "you need $12k of interior French drains" quote — the source ranking usually finds the $200 fix first
- Don't use for: active flooding (water rising), burst pipes, sewer backup — those are emergency-shutoff problems.
Quick Start
# 1. Why are my walls wet? (summer classic: humid air + cold walls)
python3 scripts/dampdoctor.py analyze --air-t 22 --rh 70 --soil-t 14 \
--wall-t 16 --area 800 --ceiling 2.3 --season summer
# 2. What size dehumidifier do I need?
python3 scripts/dampdoctor.py dehumidifier --area 800 --class wet --energy-rate 0.34
# 3. Is my existing unit keeping up? (bucket math from measured fill rate)
python3 scripts/dampdoctor.py dehumidifier --area 800 --class damp \
--measured-liters-day 6.5
# 4. Rank the moisture sources / crack the case
python3 scripts/dampdoctor.py sources --grading negative --downspouts 0.5 \
--gutters clogged --dryer-vent inside --sump none --wall-signs efflorescence
# 5. Analyze a humidity log (CSV: date,RH,Temp)
python3 scripts/dampdoctor.py log --csv basement_log.csv --target 50
The Two-Problem Decision Table
| Observation | Condensation (air problem) | Liquid water (ground problem) |
|---|---|---|
| Wall marks | uniform dust/damp film, mold on organic items, paint peeling in sheets | efflorescence salt lines, streaks from cracks, tide marks, puddles |
| Seasonality | worst in humid summer, gone in winter | worst during/after rain or snowmelt, any season |
| Floor | damp film, condensate on cold-water tank/pipes | standing water at low point, wet around wall-floor joint |
| Fix | dehumidifier + air sealing + stop interior moisture sources | downspouts/grading OUTSIDE, seal cracks, drain tile if hydrostatic |
Dehumidifier Sizing (AHAM/Energy Star table, 27°C/60% RH test)
| Area (m²) | Moderately damp (60–70% RH) | Very damp (70–80%) | Wet (80–100% / seepage) |
|---|---|---|---|
| 50 | 10 L/day (21 pt) | 12 L (25 pt) | 14 L (30 pt) |
| 100 | 14 L (30 pt) | 17 L (35 pt) | 20 L (40 pt) |
| 150 | 18 L (37 pt) | 21 L (44 pt) | 25 L (50 pt) |
| 250 | 25 L (50 pt) | 30 L (60 pt) | 34 L (70 pt) |
| 350+ | 32 L (65 pt) | 38 L (80 pt) | 44 L (90 pt) |
Rules: buy the class ×1.2 if the space is open to a humid stairwell; a unit that runs constantly at max is undersized; drain-hose mode beats buckets for anything >12 L/day; Energy Star units ≈ 1.6 L/kWh.
Common Pitfalls
- Dehumidifier for a liquid-water problem. Pulling 20 L/day from a room fed by a downspout dumping at the foundation just runs the meter — fix the water path first.
- Closing the basement "to keep humid air out" in summer. Summer air at 30°C/60% RH holds more moisture than the basement's 18°C air — ventilating with warm humid air increases condensation. Keep it closed + dehumidify.
- Efflorescence scrubbed with bleach and called mold. White crystalline powder = salts left by water passing through concrete = liquid path = outside fix.
- Sizing by floor area only. A wet 30 m² crawl space with an open stairwell needs more capacity than a sealed 100 m² basement — use the class column and the ×1.2 openness factor.
- Dryer venting or unsealed sump ignored. One dryer load = 2–4 L of water into the air if vented inside; an unsealed sump lid is a moisture pump. The
sourcesaudit prices these.
Verification Checklist
- Dew point vs wall temperature comparison shown with the verdict (not vibes)
- Wall-sign reading done (efflorescence/mold/tide marks) before any purchase
- Source ranking ordered cheap-first (downspout extensions before drain tile)
- Dehumidifier pints/day from the table × openness factor, with drain recommendation
- If verdict = LIQUID: no dehumidifier recommended as the primary fix
Example Session
$ python3 scripts/dampdoctor.py analyze --air-t 22 --rh 70 --soil-t 14 \
--wall-t 16 --area 800 --ceiling 2.3 --season summer
BASEMENT MOISTURE ANALYSIS
══════════════════════════════════════════════════════
Air: 22.0°C @ 70% RH → dew point 16.4°C
Deep-soil estimate: 14.0°C | measured wall: 16.0°C
→ Wall temp (16.0) vs dew point (16.4): wall is BELOW dew point by 0.4°C
VERDICT: CONDENSATION LIKELY — expect moisture film/mold on the coldest
surfaces (corners, north wall, cold-water tank). Relative risk rises fast:
every extra 1°C of cooling or +5% RH widens the gap.
Suggested dehumidifier target: 50% RH → extract to dew point ≤ ~11°C.
Dehumidifier class for 74 m² (799 ft²), 'damp': ~17 L/day (35 pt) ×1.2 open
= 21 L/day class.
- Downloads
- 86All time
- Security audit
- Pass
- Last updated
- 3d ago
- Current version
- v1.0.0
- License
- MIT-0
