SprintX OpenClaw Handoff

Guide an OpenClaw operator through SprintX handoff by verifying prerequisites, authenticating, selecting the project, sending event and artifact, then confir...

Use this skill when an OpenClaw user needs to connect an existing SprintX account and project with the smallest proof packet that SprintX can verify today.

Do not use this skill for broad SprintX task management, review workflows, project creation, or generic natural-language control. This skill is a thin handoff layer over the shipped SprintX CLI contract.

한국어 안내:

• 이 스킬은 OpenClaw와 SprintX를 최소 연결 확인 경로로 붙일 때만 사용합니다.
• 기본 경로는 browser-approved sx auth입니다.
• 한국어 상세 문서는 references/source-of-truth.md의 링크를 따르세요.

Primary Workflow

1. Confirm prerequisites

Before giving commands, verify all three are true:

1. The user is signed into SprintX on the web.
2. The user already has a SprintX project.
3. The user can see a projectId from /dashboard?handoff=1&projectId=<id> or the handoff card.

If the project does not exist yet, stop and send the user to SprintX onboarding first. Do not invent a project-creation flow inside this skill.

2. Check whether sx already exists

Ask the operator to run:

bash

sx --help

If sx is already installed, skip installation and go straight to sx auth.

If sx is missing, install it:

bash

npm install -g @sprint-x/cli
sx --help

3. Choose the project context

Default path:

• If the handoff URL or handoff card already shows a projectId, use it directly.

Command:

bash

sx project use <project-id>

Success signal:

• Output includes project_id
• Output includes receipt_id

Recovery path only:

• Only use sx project list when the user does not have the projectId yet or needs to recover it from shared projects.

bash

sx project list

Do not make sx project list the default first-touch step.

4. Run the proof packet in order

Run these commands in this order:

bash

sx auth
sx project use <project-id>
sx event --type runtime.started --summary "OpenClaw handoff started"
sx artifact add --title "first-log" --reference-uri "file:///tmp/openclaw.log" --content-type "text/plain" --summary "Initial OpenClaw evidence"
sx status
sx brief

Ordering matters:

• sx event must happen before the first artifact receipt.
• sx artifact upload is still an alias, but prefer sx artifact add in the primary path.

5. Confirm success at each step

Use these pass/fail signals:

• sx auth The CLI opens the SprintX approval URL or prints it in headless mode, then stores the local session.
• sx project use Returns project_id and receipt_id.
• sx event Returns status: accepted.
• sx artifact add Returns status: accepted.
• sx status Reads the expected project context.
• sx brief Returns a bounded next-step summary for the same project.

If the user reaches sx status and sx brief successfully, the handoff is complete.

Troubleshooting And Advanced Operators

The default path is always browser-approved sx auth.

Only move to this section when the user is in CI, headless, or another browserless environment.

Headless auth

Use:

bash

sx --headless auth

In headless mode, the approval URL is printed to stdout. The user should open that URL in a browser session that is already signed into SprintX.

Access-token override

If the environment already injects an access token, SprintX CLI can skip browser auth.

Treat this as advanced or break-glass behavior only.

Hard rule:

• Do not ask users to paste tokens into chat.
• Do not recommend token copy/paste as the default onboarding path.

If the user needs the exact token override procedure or API URL override steps, point them to the upstream SprintX CLI docs in references/source-of-truth.md.

Rescue Map

Always name the failure class and give the explicit next command or next check. Do not end with vague copy like "something went wrong."

• cli_missing Install @sprint-x/cli, then rerun sx --help.
• auth_required Run sx auth.
• project_context_missing Run sx project use <projectId>.
• project_membership_invalid Re-check SprintX project access on the web, then rerun sx auth.
• artifact_before_event Run sx event first, then retry sx artifact add.
• readback_failed Reconfirm auth and project context, then retry sx status and sx brief.
• api_unreachable Verify the SprintX API base URL, connectivity, and retry window.

Guardrails

• SprintX is not the executor. OpenClaw executes, SprintX reads and governs.
• Do not expose provider API key management as part of this flow.
• Do not introduce broader CLI commands into the hero path.
• Keep the interaction checklist-like and explicit.

Source Of Truth

Read references/source-of-truth.md when you need:

• the public quickstart links
• the Korean docs links
• ClawHub publish guidance for this repo