Gate Flash Swap Skill

Gate Flash Swap skill. Use when the user asks to instantly convert or exchange cryptocurrencies without placing an order book trade. Triggers on 'flash swap', 'convert USDT to BTC', 'swap multiple coins'.

Gate@gate-exchange

Install

openclaw skills install @gate-exchange/gate-exchange-flashswap

Gate Flash Swap

General Rules

⚠️ STOP — You MUST read and strictly follow the shared runtime rules before proceeding. Do NOT select or call any tool until all rules are read. These rules have the highest priority. → Read gate-runtime-rules.md

Only call MCP tools explicitly listed in this skill. Tools not documented here must NOT be called, even if they exist in the MCP server.

MCP Dependencies

Required MCP Servers

MCP Server	Status
Gate (main)	✅ Required

MCP Tools Used

Query Operations (Read-only)

cex_fc_get_fc_order
cex_fc_list_fc_currency_pairs
cex_fc_list_fc_orders
cex_fc_preview_fc_multi_currency_many_to_one_order
cex_fc_preview_fc_multi_currency_one_to_many_order
cex_fc_preview_fc_order_v1

Execution Operations (Write)

cex_fc_create_fc_multi_currency_many_to_one_order
cex_fc_create_fc_multi_currency_one_to_many_order
cex_fc_create_fc_order_v1

Authentication

API Key Required: Yes (see skill doc/runtime MCP deployment)
Permissions: Fc:Write
Get API Key: https://www.gate.io/myaccount/profile/api-key/manage

Installation Check

Required: Gate (main)
Install: Run installer skill for your IDE
- Cursor: gate-mcp-cursor-installer
- Codex: gate-mcp-codex-installer
- Claude: gate-mcp-claude-installer
- OpenClaw: gate-mcp-openclaw-installer

MCP Mode

Read and strictly follow references/mcp.md, then execute this skill's flashswap workflow.

SKILL.md keeps routing and scenario boundaries.
references/mcp.md is the authoritative MCP execution layer for preview/create sequencing, confirmation gates, and degraded handling.

Trigger Conditions

This Skill is activated when the user's request matches any of the following:

Wants to swap/convert/exchange one cryptocurrency for another
Wants to buy multiple cryptocurrencies at once using one currency (e.g. "buy 1u BTC, 2u ETH")
Wants to sell multiple cryptocurrencies into one target currency (e.g. "sell 1 BTC, 2 ETH for USDT")
Asks which currencies support flash swap
Asks about minimum/maximum swap amounts or limits
Requests flash swap order history or specific order details
Uses keywords: "flash swap", "convert", "quick exchange", "swap", "instant swap"

Quick Start

Common usage examples:

One-to-one swap: "Sell 1 BTC for USDT"
Buy multiple coins: "Buy 1u BTC, 2u ETH, 3u SOL"
Sell multiple coins: "Sell 1 BTC, 2 ETH, 3 SOL for USDT"
Check pairs: "Show me flash swap supported pairs"
Order history: "Show me my flash swap orders"

Domain Knowledge

Flash Swap is a quick crypto exchange service provided by Gate. Users can instantly convert one cryptocurrency to another at the real-time exchange rate without placing orders and waiting for matching.

Swap Modes:

One-to-One: Swap a single currency for another single currency (e.g. BTC → USDT)
One-to-Many: Swap one currency into multiple target currencies (e.g. USDT → BTC + ETH + SOL)
Many-to-One: Swap multiple currencies into one target currency (e.g. BTC + ETH + SOL → USDT)

Key Concepts:

sell_asset / buy_asset: The currency symbols for the sell side and buy side
sell_amount / buy_amount: Specify one of them; the API calculates the other. For one-to-many, use sell_amount per target; for many-to-one, use sell_amount per source
quote_id: A unique identifier returned by the preview API, required for order creation. The exact validity period is indicated by valid_timestamp in the response. Always check this field — do not assume a fixed duration
Order Status: 1 = success, 2 = failed

API Field Naming:

cex_fc_list_fc_currency_pairs returns snake_case fields: sell_min_amount, sell_max_amount, buy_min_amount, buy_max_amount, currency_pair, sell_currency, buy_currency
cex_fc_preview_fc_order_v1 and multi-currency preview APIs return camelCase fields in some environments (e.g. sellMinAmount). Always read the actual field names from the response — do not assume a fixed naming convention
cex_fc_list_fc_orders and cex_fc_get_fc_order return snake_case: sell_currency, buy_currency, sell_amount, buy_amount, create_time

Data type note: order_id is returned as a string in API responses. quote_id is also a string.

MCP Tool Inventory:

Tool	Type	Description
`cex_fc_preview_fc_order_v1`	Preview	One-to-one swap quote preview
`cex_fc_create_fc_order_v1`	Create	One-to-one swap order creation (requires `quote_id`)
`cex_fc_preview_fc_multi_currency_one_to_many_order`	Preview	One-to-many swap quote preview
`cex_fc_create_fc_multi_currency_one_to_many_order`	Create	One-to-many swap order creation
`cex_fc_preview_fc_multi_currency_many_to_one_order`	Preview	Many-to-one swap quote preview
`cex_fc_create_fc_multi_currency_many_to_one_order`	Create	Many-to-one swap order creation
`cex_fc_list_fc_currency_pairs`	Query	List supported flash swap pairs and limits
`cex_fc_list_fc_orders`	Query	Query flash swap order history
`cex_fc_get_fc_order`	Query	Query single flash swap order by ID

Workflow

Step 1: Identify User Intent

Analyze the user's request to determine which flash swap operation to perform.

Intent classification:

User Intent	Mode	Preview Tool	Create Tool
Swap one coin for another (e.g. "sell 1 BTC for USDT")	one-to-one	`cex_fc_preview_fc_order_v1`	`cex_fc_create_fc_order_v1`
One-click swap without separate confirmation (e.g. "directly swap 100 USDT to GT")	one-to-one-auto	`cex_fc_preview_fc_order_v1` → `cex_fc_create_fc_order_v1`	—
Buy multiple coins with one currency (e.g. "buy 1u BTC, 2u ETH")	one-to-many	`cex_fc_preview_fc_multi_currency_one_to_many_order`	`cex_fc_create_fc_multi_currency_one_to_many_order`
Split one currency into multiple by ratio (e.g. "split 1000 USDT, half BTC half ETH")	one-to-many-split	`cex_fc_preview_fc_multi_currency_one_to_many_order`	`cex_fc_create_fc_multi_currency_one_to_many_order`
Buy specific quantities of multiple coins (e.g. "buy 0.1 BTC and 1 ETH with USDT")	one-to-many-buy	`cex_fc_preview_fc_multi_currency_one_to_many_order`	`cex_fc_create_fc_multi_currency_one_to_many_order`
Sell multiple coins into one currency (e.g. "sell 1 BTC, 2 ETH for USDT")	many-to-one	`cex_fc_preview_fc_multi_currency_many_to_one_order`	`cex_fc_create_fc_multi_currency_many_to_one_order`
Consolidate all holdings of certain coins into one (e.g. "convert all my BTC, ETH, DOGE to USDT")	many-to-one-all	`cex_fc_preview_fc_multi_currency_many_to_one_order`	`cex_fc_create_fc_multi_currency_many_to_one_order`
Preview-only for multi-currency (e.g. "how much GT can I get for my BTC and ETH?")	many-to-one-preview	`cex_fc_preview_fc_multi_currency_many_to_one_order`	—
Query supported flash swap pairs	query	`cex_fc_list_fc_currency_pairs`	—
Query flash swap order list	query	`cex_fc_list_fc_orders`	—
Query single flash swap order by ID	query	`cex_fc_get_fc_order`	—
Verify latest order result (e.g. "did my swap succeed?")	verify-order	`cex_fc_get_fc_order`	—

Key data to extract:

intent: "one_to_one" / "one_to_one_auto" / "one_to_many" / "one_to_many_split" / "one_to_many_buy" / "many_to_one" / "many_to_one_all" / "many_to_one_preview" / "list_pairs" / "list_orders" / "get_order" / "verify_order"
sell_asset / buy_asset: currencies involved
sell_amount / buy_amount: amounts specified by the user

Step 2: Pre-validate Swap Amount (before any preview)

Before calling the preview API, validate the user's amount against the pair's min/max limits to avoid unnecessary API calls.

Call cex_fc_list_fc_currency_pairs with:

currency: the sell_asset or buy_asset from the user's request

Key data to extract:

sell_min_amount / sell_max_amount: allowed range for the sell side
buy_min_amount / buy_max_amount: allowed range for the buy side

Validation logic:

If the user's sell_amount < sell_min_amount, inform them the amount is below the minimum and do NOT proceed to preview
If the user's sell_amount > sell_max_amount, inform them the amount exceeds the maximum
If the pair is not found, the currency is not supported for flash swap

Skip this step if the user explicitly requests "one-click" or "direct" swap to minimize latency.

Step 3: Preview — One-to-One Swap (if intent = one_to_one or one_to_one_auto)

Call cex_fc_preview_fc_order_v1 with:

sell_asset (required, string): asset to sell, e.g. "BTC"
buy_asset (required, string): asset to buy, e.g. "USDT"
sell_amount (string): amount to sell. Choose one between sell_amount and buy_amount
buy_amount (string): amount to buy. Choose one between sell_amount and buy_amount

Key data to extract:

quote_id: required for creating the order
sell_asset / sell_amount: confirmed sell side
buy_asset / buy_amount: calculated buy side
price: exchange rate
valid_timestamp: quote expiry time

For one_to_one intent: Present the preview to the user and ask for confirmation before proceeding to create.

For one_to_one_auto intent: The user has pre-authorized the swap by explicitly requesting "direct" or "one-click" execution. Skip the separate confirmation prompt and immediately proceed to Step 4. This is compliant with the Safety Rules as the user's direct request serves as confirmation. However: if the preview returns any error (code != 0), do NOT proceed to Step 4 — report the error to the user immediately.

Step 4: Create — One-to-One Swap (after user confirms Step 3, or auto for one_to_one_auto)

Pre-condition: Step 3 must have returned code == 0 with a valid quote_id. If Step 3 failed (any code != 0), do NOT execute this step. Never fabricate a quote_id.

Call cex_fc_create_fc_order_v1 with body JSON string:

quote_id (required, string): from preview response — must be the actual value returned by the API
sell_asset (required, string): asset to sell
sell_amount (required, string): amount to sell
buy_asset (required, string): asset to buy
buy_amount (required, string): amount to buy

Key data to extract:

id: created order ID
status: 1 = success, 2 = failed
sell_asset / sell_amount / buy_asset / buy_amount: confirmed amounts
price: executed rate
create_time: order creation timestamp
error.code / error.message: check for errors even when HTTP status is 200

Order result verification: After creating, check the status field:

If status == 1: Inform the user the swap succeeded, show the final buy_amount received
If status == 2: Inform the user the swap failed, suggest re-previewing and trying again
If error.code != 0: Report the specific error message to the user

Step 5: Preview — One-to-Many Swap (if intent = one_to_many, one_to_many_split, or one_to_many_buy)

For one_to_many_split: The user specifies a total amount and a distribution ratio (e.g. "split 1000 USDT, half BTC half ETH"). Calculate the per-target sell_amount before calling the API.

For one_to_many_buy: The user specifies target buy_amount per currency (e.g. "buy 0.1 BTC and 1 ETH"). Use the buy_amount field instead of sell_amount in the params array to let the API calculate the required sell amount.

Call cex_fc_preview_fc_multi_currency_one_to_many_order with body JSON string:

params (required, array): each element contains:
- sell_asset (required, string): source currency (same for all, e.g. "USDT")
- sell_amount (string): amount of source currency to spend on this target
- buy_asset (required, string): target currency (e.g. "BTC", "ETH")
- buy_amount (string): alternative to sell_amount

Key data to extract:

orders[]: array of preview results, each containing quote_id, sell_amount, buy_amount, price, and error
total_consume_amount: total amount of source currency consumed
Check each order's error.code — if non-zero, that item failed to get a quote

Present the full preview table and highlight any failed items. Ask for confirmation.

Step 6: Create — One-to-Many Swap (after user confirms Step 5)

Important: Exclude any items that failed in preview (where error.code != 0 or quote_id is missing).

Call cex_fc_create_fc_multi_currency_one_to_many_order with body JSON string:

params (required, array): each element contains:
- sell_asset (required, string): source currency
- sell_amount (required, string): amount to sell
- buy_asset (required, string): target currency
- buy_amount (required, string): amount to buy (from preview)
- quote_id (string): from preview response

Key data to extract:

orders[]: array of created orders, each with id, status, error
total_consume_amount: actual total consumed
Check each order's error.code for per-item failures

Step 7: Preview — Many-to-One Swap (if intent = many_to_one, many_to_one_all, or many_to_one_preview)

For many_to_one_all: The user wants to consolidate all holdings of specified currencies. Before previewing, query the user's spot account balances to determine the actual amount for each currency. Filter out currencies whose balance is below the flash swap minimum amount (sell_min_amount from cex_fc_list_fc_currency_pairs).

Call cex_fc_preview_fc_multi_currency_many_to_one_order with body JSON string:

params (required, array): each element contains:
- sell_asset (required, string): source currency (e.g. "BTC", "ETH")
- sell_amount (string): amount to sell
- buy_asset (required, string): target currency (same for all, e.g. "USDT")
- buy_amount (string): alternative to sell_amount

Key data to extract:

orders[]: array of preview results with quote_id, sell_amount, buy_amount, price, error
total_acquire_amount: total amount of target currency to receive
Check each order's error.code — non-zero means that item failed

Present the full preview table and highlight any failed items.

For many_to_one_preview: Present the total expected buy_amount (sum of all successful items) and do NOT proceed to create. Inform the user this is a preview only.

For many_to_one and many_to_one_all: Ask for user confirmation before proceeding to create.

Step 8: Create — Many-to-One Swap (after user confirms Step 7)

Important: Exclude any items that failed in preview. Including a failed item (e.g. buy_amount: "0") will cause the entire request to be rejected with code: 4.

Call cex_fc_create_fc_multi_currency_many_to_one_order with body JSON string:

params (required, array): each element contains:
- sell_asset (required, string): source currency
- sell_amount (required, string): amount to sell
- buy_asset (required, string): target currency
- buy_amount (required, string): amount to buy (from preview)
- quote_id (string): from preview response

Key data to extract:

orders[]: array of created orders with id, status, error
total_acquire_amount: actual total received

Step 9: Query Flash Swap Pairs (if intent = list_pairs)

Call cex_fc_list_fc_currency_pairs with:

currency (optional, string): filter by currency symbol
limit (optional, number): max items returned (default 1000)
page (optional, number): page number

Large result set warning: Without a currency filter, this may return thousands of rows. Summarize the total count, show a sample of 20 pairs, and suggest filtering by currency.

Key data to extract:

items[]: list of currency pairs with currency_pair, sell_currency, buy_currency, sell_min_amount, sell_max_amount, buy_min_amount, buy_max_amount

Step 10: Query Flash Swap Order History (if intent = list_orders)

Before calling, validate the status parameter if provided. Only 1 (success) and 2 (failed) are valid.

Call cex_fc_list_fc_orders with:

status (optional, number): 1 = success, 2 = failed
sell_currency (optional, string): filter by sell currency
buy_currency (optional, string): filter by buy currency
limit (optional, number): max records
page (optional, number): page number
reverse (optional, boolean): true for newest first (default)

Key data to extract:

Order list with id, sell_currency, buy_currency, sell_amount, buy_amount, price, status, create_time

Step 11: Query Single Order (if intent = get_order or verify_order)

Call cex_fc_get_fc_order with:

order_id (required, number): the order ID to query

If the API returns 404, inform the user the order was not found.

For verify_order: After retrieving the order, check status:

If status == 1: Confirm the swap succeeded, show the final buy_amount actually received
If status == 2: Inform the user the swap failed, suggest re-previewing and placing a new order

Key data to extract:

Full order details: id, sell_currency, buy_currency, sell_amount, buy_amount, price, status, create_time

Step 12: Format and Present Results

Format results using the appropriate Report Template. For swap operations, always show:

Preview summary table with quote details
After creation, show order IDs, status, and any per-item errors

Error Handling

Error Scenario	Handling
Region/compliance restriction (code -2)	CRITICAL: The API returns `{"code":-2,"message":"This service is not supported in your region"}`. This means flash swap is not available for this user's region. Immediately stop all operations, do NOT proceed to create, and inform the user: "Flash swap is not available in your region due to compliance restrictions." Do NOT fabricate any results
Preview failed (any non-zero code)	CRITICAL: If the preview API returns any `code != 0`, the operation has FAILED. Do NOT proceed to the create step. Do NOT fabricate a `quote_id`. Report the exact error code and message to the user. Never show "success" when the API returned an error
Amount below minimum (sell_amount < sell_min_amount)	Query `cex_fc_list_fc_currency_pairs` first. If below minimum, inform the user with the exact minimum and do NOT call preview
Amount above maximum (sell_amount > sell_max_amount)	Inform the user the amount exceeds the maximum allowed, show the limit
Quote expired (code 1052)	The `quote_id` has expired. Re-run the preview to get a fresh quote, then immediately create the order
Unable to get accurate quote (code 4 / 400001 / 400007)	These are quote-related errors from the server. `code 4` is a top-level rejection (often caused by including a failed item). `400001` and `400007` are per-item errors meaning the server cannot price this pair/amount. Suggest adjusting the amount, trying a different pair, or removing the failed item
Multi-currency create: entire request rejected (code 4)	Likely caused by including a preview-failed item with `buy_amount: "0"`. Remove all items where preview `error.code != 0` and retry
Order status == 2 (failed)	Inform the user the swap failed. Suggest re-previewing with adjusted parameters and trying again
Order not found (404)	The `order_id` does not exist. Suggest verifying the ID or querying the order list first
MCP service connection failure	Prompt user to check network or VPN, suggest retrying later
order_id not provided	Prompt user to provide an order ID, or use the order list query first
Empty query results	Inform user no data was found, suggest adjusting filters
Currency not supported	Inform user that the specified currency is not available for flash swap
Invalid status value	Status only accepts `1` (success) or `2` (failed). Reject other values before calling the API
Large result set (thousands of rows)	Summarize total count, show sample of 20, suggest filtering by currency
Balance below minimum for many_to_one_all	When consolidating all holdings, skip currencies whose balance < sell_min_amount and inform the user which were excluded

Safety Rules

NEVER fabricate results: If any API call returns an error (code != 0), you MUST report the actual error to the user. NEVER fabricate a successful response, fake order ID, fake quote_id, or fake transaction result. This is the most critical safety rule
NEVER proceed after preview failure: If the preview API returns any error (code != 0, including code -2 for region restriction), you MUST stop immediately. Do NOT call the create API. Do NOT invent a quote_id (e.g. "AUTO-GT-001"). Report the error honestly
Always preview before creating: Every swap must go through the preview step first. For standard flows, show the quote to the user and wait for explicit confirmation before calling the create API. For one_to_one_auto mode only: the user has explicitly requested a direct swap (e.g. "directly swap", "one-click"), which counts as pre-authorized confirmation — proceed to create immediately after preview without a separate confirmation prompt
No write operations without confirmation: Never call any create/order API unless (a) the user has explicitly confirmed the preview result, or (b) the user explicitly requested a one-click/direct swap. Query operations (list pairs, list orders, get order) do not require confirmation
Exclude failed preview items: When creating multi-currency orders, only include items that succeeded in preview (error.code == 0)
Do not expose sensitive info: Never output API Key, Secret, or authentication tokens
Display amounts as-is: Do not round or modify amounts from API responses
Warn on large amounts: If the total swap amount exceeds 10,000 USDT equivalent, remind the user to double-check
Stale confirmation handling: If the user confirms a previous preview, check whether the current time has exceeded the valid_timestamp from that preview response. If expired, automatically re-preview to get a fresh quote before creating

Judgment Logic Summary

Condition	Action	Tool
User wants to swap one coin for another	Preview one-to-one, then create after confirmation	`cex_fc_preview_fc_order_v1` → `cex_fc_create_fc_order_v1`
User says "directly" or "one-click" swap	Preview + create automatically without separate confirmation	`cex_fc_preview_fc_order_v1` → `cex_fc_create_fc_order_v1`
User references a previous quote_id for confirmation	Create order using the referenced quote_id	`cex_fc_create_fc_order_v1`
Swap amount is suspiciously small	Pre-validate against pair min amount before preview	`cex_fc_list_fc_currency_pairs`
User wants to buy multiple coins with one currency	Preview one-to-many, then create	`cex_fc_preview_fc_multi_currency_one_to_many_order` → `cex_fc_create_fc_multi_currency_one_to_many_order`
User wants to split one currency by ratio (e.g. "half and half")	Calculate per-target sell_amount, then preview one-to-many	`cex_fc_preview_fc_multi_currency_one_to_many_order` → `cex_fc_create_fc_multi_currency_one_to_many_order`
User specifies buy quantities (e.g. "buy 0.1 BTC and 1 ETH")	Use buy_amount in params, preview one-to-many	`cex_fc_preview_fc_multi_currency_one_to_many_order` → `cex_fc_create_fc_multi_currency_one_to_many_order`
User wants to sell multiple coins into one currency	Preview many-to-one, then create	`cex_fc_preview_fc_multi_currency_many_to_one_order` → `cex_fc_create_fc_multi_currency_many_to_one_order`
User wants to consolidate "all" of certain holdings	Query balances, filter by min amounts, preview many-to-one, then create	`cex_fc_list_fc_currency_pairs` → `cex_fc_preview_fc_multi_currency_many_to_one_order` → `cex_fc_create_fc_multi_currency_many_to_one_order`
User asks "how much can I get" without wanting to execute	Preview-only many-to-one, sum buy_amounts, do NOT create	`cex_fc_preview_fc_multi_currency_many_to_one_order`
Preview returns items with `error.code != 0`	Warn user, exclude failed items before creating	—
Preview returns code -2 (region restriction)	STOP immediately. Do NOT create. Inform user flash swap is not available in their region	—
Preview returns any non-zero code	STOP. Do NOT create. Do NOT fabricate quote_id. Report exact error to user	—
Create returns code 1052 (quote expired)	Re-run preview to get fresh quote	Preview tool
Create returns per-item error (400001/400007)	Report which items failed, suggest adjusting amounts	—
Multi-currency create rejected with code 4	Remove failed preview items and retry	Create tool
Order status == 2 after create	Inform user swap failed, suggest retrying	—
User asks "did my swap succeed?"	Query order by ID, check status field	`cex_fc_get_fc_order`
User asks about supported pairs or limits	Query pair list	`cex_fc_list_fc_currency_pairs`
User queries order history	Query order list	`cex_fc_list_fc_orders`
User queries specific order by ID	Query single order	`cex_fc_get_fc_order`
Order not found (404)	Inform user, suggest checking ID	—
User provides invalid status filter	Reject and inform valid values are 1 or 2	—

Report Template

Timestamp format: All {timestamp} placeholders use ISO 8601 format: YYYY-MM-DD HH:mm:ss UTC.

One-to-One Preview Report

markdown

## Flash Swap Preview (One-to-One)

**Quote ID**: {quote_id}
**Valid Until**: {valid_timestamp}

| Sell | Amount | Buy | Amount | Rate |
|------|--------|-----|--------|------|
| {sell_asset} | {sell_amount} | {buy_asset} | {buy_amount} | {price} |

Proceed with this swap? (Yes/No)

One-to-One Order Report

markdown

## Flash Swap Order Created

**Order ID**: {id}
**Status**: {status_text}
**Created At**: {create_time}

| Sell | Amount | Buy | Amount | Rate |
|------|--------|-----|--------|------|
| {sell_asset} | {sell_amount} | {buy_asset} | {buy_amount} | {price} |

Multi-Currency Preview Report (One-to-Many / Many-to-One)

markdown

## Flash Swap Preview ({mode})

**Total {direction}**: {total_amount} {currency}

| # | Sell | Sell Amount | Buy | Buy Amount | Rate | Quote ID | Status |
|---|------|-------------|-----|------------|------|----------|--------|
| {n} | {sell_asset} | {sell_amount} | {buy_asset} | {buy_amount} | {price} | {quote_id} | {status} |

{failed_count} item(s) failed to get a quote and will be excluded from the order.
Proceed with {success_count} successful item(s)? (Yes/No)

Multi-Currency Order Report

markdown

## Flash Swap Orders Created ({mode})

**Total {direction}**: {total_amount} {currency}

| # | Order ID | Sell | Sell Amount | Buy | Buy Amount | Status | Error |
|---|----------|------|-------------|-----|------------|--------|-------|
| {n} | {id} | {sell_asset} | {sell_amount} | {buy_asset} | {buy_amount} | {status_text} | {error_message} |

{success_count}/{total_count} orders succeeded.

Pair List Report

markdown

## Gate Flash Swap Supported Pairs

**Query Time**: {timestamp}
**Filter**: {currency filter or "None"}

| Pair | Sell Currency | Buy Currency | Sell Min | Sell Max |
|------|---------------|--------------|----------|----------|
| {currency_pair} | {sell_currency} | {buy_currency} | {sell_min_amount} | {sell_max_amount} |

Total: {total} pairs.

Order List Report

markdown

## Gate Flash Swap Order History

**Query Time**: {timestamp}
**Filters**: Status={status}, Sell={sell_currency}, Buy={buy_currency}

| Order ID | Sell | Sell Amount | Buy | Buy Amount | Status | Created At |
|----------|------|-------------|-----|------------|--------|------------|
| {id} | {sell_currency} | {sell_amount} | {buy_currency} | {buy_amount} | {status_text} | {create_time} |

Total: {total} records.

Order Detail Report

markdown

## Gate Flash Swap Order Details

| Field | Value |
|-------|-------|
| Order ID | {id} |
| Sell Currency | {sell_currency} |
| Sell Amount | {sell_amount} |
| Buy Currency | {buy_currency} |
| Buy Amount | {buy_amount} |
| Exchange Rate | {price} |
| Status | {status_text} |
| Created At | {create_time} |