tuya-local-control

Control Tuya / Smart Life devices locally over LAN: fetch local keys once via the Tuya cloud API, then read and write DPS with tinytuya.

Use when the user wants to read state or switch Tuya / Smart Life devices (plugs, bulbs, sensors, thermostats, curtain motors) from a script or local dashboard — without depending on the Tuya/Smart Life app or the cloud at runtime.

Tuya devices answer a local protocol on TCP port 6668. To talk to them you need three things per device: its device id, its local key, and its LAN IP. The app keeps the local key, so you fetch it once from the Tuya cloud API and then everything runs locally.

Only control devices you own. Local keys are per-device secrets — keep tuya_devices.json out of git and never paste keys into chat.

Steps

1. Install the library. pip install tinytuya. Completion: python -c "import tinytuya; print(tinytuya.__version__)" prints a version.

2. Find the device on the LAN. Optional but the fastest way to learn the IP and the protocol version. Run python -m tinytuya scan (or tinytuya.deviceScan()), or read the device list from your router's DHCP leases. Completion: you have an IP for the device. Devices are often at a fixed DHCP lease, but the IP can change — re-check before blaming the code.

3. Fetch device ids + local keys from the cloud (one time). Create a free Tuya IoT Platform project, enable IoT Core, and link your Smart Life / Tuya app account to it (Devices → Link App Account). Note the project's Access ID / Client ID and Access Secret / Client Secret, plus the region (eu, us, cn, in). Put them in environment variables and run the bundled scripts/fetch_keys.py. Completion: tuya_devices.json exists and lists at least one device with a local key.

4. Probe the device locally. Run scripts/local_status.py <name-or-id>. It opens a tinytuya.Device with the stored id + key + IP and calls status(). If it fails, try the other protocol version (3.3 vs 3.4) — this is the single most common cause of an empty or refused response. Completion: you get a JSON blob of DPS values.

5. Map the DPS you care about. The status() JSON is a dict of numeric DPS keys to values (e.g. "1": true, "20": 210). Read the device's DPS meaning from the Tuya IoT Platform "Device Debugging" tab or by toggling the device in the app and watching which key changes. Completion: you can name the exact DPS key and value type for the function you want to drive.

6. Write a value. Run scripts/local_set.py <device> <dps> <value> (see the script header for the JSON form used to set several DPS at once). Completion: local_status.py shows the new value, and if it is a physical output the device actually switched.

7. Wrap it. Once the read + write calls are proven, put them behind whatever the user asked for: a CLI, a poll loop, a local web dashboard. Cache the device object and reuse the connection; re-read the device JSON on startup, not on every call.

Notes and pitfalls

• version matters. Tuya devices speak protocol 3.1, 3.3, or 3.4. Passing the wrong one gives an empty response or payload error, not a helpful message. Try each; 3.3 is the usual default.
• Local keys rotate. Re-pairing a device in the app, or a firmware reset, invalidates the stored key. If local calls suddenly fail while the device is online in the app, re-run the key fetch.
• The cloud is only needed for provisioning. After tuya_devices.json exists, all reads and writes are LAN-local — no internet required.
• LAN only. The host running the script must be on the same network as the device (no VPN isolation, no guest-network client isolation).
• One writer at a time. Some Tuya devices tolerate only a single local TCP session; a second client can make the first one time out.
• Cloud API free tier. The IoT Core free trial ties a project to one app account and expires; when it does, only the cloud key fetch stops working. Local control keeps working with the keys you already saved.
• Use set_value(dps, value) for a single DPS and set_multiple_values({...}) for several at once; values must match the type the device expects (bool / int / str).

Bundled scripts

• scripts/fetch_keys.py — read Access ID/Secret from the environment, call the cloud API, write tuya_devices.json.
• scripts/local_status.py — connect locally by device name or id and print the DPS status.
• scripts/local_set.py — connect locally and write one DPS (or several via a JSON argument).