Alibabacloud Cfw Acl Diagnosis

Other

Alibaba Cloud Cloud Firewall ACL rule read-only diagnostic assistant. **Trigger Scenarios**: Diagnose ACL rules not taking effect, troubleshoot Internet/NAT/VPC firewall traffic issues, query traffic logs, check matched rules, get configuration guidance (console manual operation). **Supported firewall types**: Internet Firewall, NAT Boundary Firewall, VPC Boundary Firewall **Keywords**: Cloud Firewall rules not taking effect, Internet Firewall ACL diagnosis, NAT Firewall policy not working, VPC Boundary Firewall rule diagnosis, firewall rule diagnosis ⚠️ **DO NOT use** for WAF issues - use alibabacloud-waf-rule-management skill instead. TEXT-ONLY console guidance. Queries and diagnosis only, no configuration changes.

Install

openclaw skills install alibabacloud-cfw-acl-diagnosis

Cloud Firewall ACL Rule Diagnosis (Read-Only)

⚠️ READ-ONLY CONSTRAINT (HIGHEST PRIORITY)

STRICTLY PROHIBITED throughout entire workflow:

❌ NEVER execute Create/Update/Delete API calls or write CLI commands
❌ NEVER provide executable configuration commands with specific parameter values
❌ NEVER use --profile parameter in any CLI command
❌ NEVER run aliyun configure get or aliyun configure list
❌ NEVER fabricate CLI output — use only real API responses
❌ Do NOT output diagnosis report unless at least one CLI query has succeeded
❌ Do NOT reference any memory, experience, or external knowledge — ONLY this SKILL.md and CLI outputs
❌ NEVER create any file in any way — do NOT use write_file, create_file, Bash redirection (>, >>, tee), or any other file-writing mechanism

【强制拦截】Pre-output Self-Check (MANDATORY before generating ANY reply):

Before writing any response, internally verify: Have I called write_file, create_file, or any Bash redirection? If YES → immediately abort file output and print the content as Markdown text directly in the conversation instead. Violation of this rule causes immediate task failure.

All diagnosis reports MUST start with:

⚠️ 声明：本工具为只读诊断助手，仅提供分析和配置建议，不会执行任何配置变更操作。

Allowed queries only: aliyun cloudfw describe-* | aliyun sls get-logs-v2 | aliyun actiontrail lookup-events

See references/security_rules.md for complete prohibitions list.

Trigger & Service Identification

Intent Classification (FIRST STEP — decide path before doing anything else)

User Intent	Keywords	Action
Configuration Query	「如何配置」/「怎么设置」/「配置流程」/「规则怎么写」/「配置步骤」	→ CONFIG PATH: Read `references/configuration_guide.md`, output steps directly in conversation. NO CLI commands, NO firewall queries.
Diagnosis / Troubleshooting	「不生效」/「没效果」/「被拦截」/「HitTimes=0」/「流量日志」/「排查」	→ DIAGNOSIS PATH: IMMEDIATELY start Step 0 with information already provided. DO NOT wait for more input.
「安全组」/「Security Group」	—	NOT this skill (use aliyun ecs commands)
「防火墙」without qualifier	—	ASK: Cloud Firewall or Security Group?

CONFIG PATH output rule: Output configuration steps directly in conversation as text. Reference references/configuration_guide.md for content. Do NOT run any CLI commands.

Setup

Step 0.0: AI-Mode (REQUIRED Before Any CLI Commands)

aliyun configure ai-mode enable
aliyun configure ai-mode set-user-agent --user-agent "AlibabaCloud-Agent-Skills/alibabacloud-cfw-acl-diagnosis"
aliyun plugin update

At workflow end: aliyun configure ai-mode disable

Prerequisites Check

which aliyun && aliyun version
aliyun plugin list  # Confirm aliyun-cli-cloudfw installed

Install plugin if missing: aliyun plugin install cloudfw
Credentials: ALIBABA_CLOUD_ACCESS_KEY_ID / ALIBABA_CLOUD_ACCESS_KEY_SECRET env vars. See references/ram-policies.md.
Region: Always use cn-hangzhou (Cloud Firewall is a global service, do NOT ask user for region).

Firewall Type Identification

Scenario	Firewall Type	Key Parameter
Public IP, EIP, Internet inbound/outbound	Internet Firewall	No FirewallId (global)
VPC inter-access, CEN, Express Connect	VPC Boundary Firewall	VpcFirewallId
NAT Gateway, SNAT/DNAT	NAT Boundary Firewall	NatFirewallId

Key differences:

Internet FW: --Direction <in|out> required; asset-level EngineMode (strict/loose)
NAT FW: no Direction; firewall-level StrictMode (0=loose, 1=strict); supports domain rules
VPC FW: no Direction; no strict mode; no domain rules (Layer 4 only)

Protected asset identification:

Inbound (in) → Protected asset = Destination
Outbound (out) → Protected asset = Source (public IP, not internal CIDR)

Diagnosis Flow (MANDATORY ORDER)

Process: Step 0 → Step 1 → Step 2 (3 checks) → [ANY FAIL: output conclusion, STOP] → Step 3 → Step 4 → Report

🔴 FORBIDDEN before Step 2 complete: Do NOT mention engine mode, give conclusions, suggest solutions, or skip any CLI query.

Step 0: Identify Protected Asset

Extract from user message — do NOT re-ask what user already provided:

Firewall type, direction (in/out), target IP/domain
Apply protected asset logic above

Step 1: Query Rules (MUST execute CLI — NO fabrication)

Firewall	Command
Internet	`aliyun cloudfw describe-control-policy --Direction <in\|out> --CurrentPage 1 --PageSize 50 --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-acl-diagnosis`
NAT	`aliyun cloudfw describe-nat-firewall-control-policy --NatFirewallId <ID> --CurrentPage 1 --PageSize 50 --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-acl-diagnosis`
VPC	`aliyun cloudfw describe-vpc-firewall-control-policy --VpcFirewallId <ID> --CurrentPage 1 --PageSize 50 --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-acl-diagnosis`

Record: Source, Destination, DestinationType, AclAction, Order, Release.

SELF-CHECK: If no CLI command executed yet, STOP and execute NOW before proceeding.

Step 2: Pre-checks (ALL 3 in order — NO skipping, NO guessing)

Check 2.1: Asset/Firewall Status

Internet FW: aliyun cloudfw describe-asset-list --CurrentPage 1 --PageSize 50 --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-acl-diagnosis
- ProtectStatus=open ✅ | other values ❌ (most common cause of rules not working)
- Record EngineMode: strict / loose
NAT FW: aliyun cloudfw describe-nat-firewall-list --PageNo 1 --PageSize 50 --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-acl-diagnosis
- Check firewall exists and status normal; record StrictMode: 0=loose / 1=strict
VPC FW: aliyun cloudfw describe-vpc-firewall-list --CurrentPage 1 --PageSize 50 --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-acl-diagnosis
- Check firewall exists and status normal

Check 2.2: Policy Matches Asset

Source/Destination covers protected asset; direction correct
If user's target domain ≠ rule's domain → CONFIGURATION MISMATCH — highlight explicitly

Check 2.3: Rule Enabled

Release=true ✅ | Release=false ❌

🔴 [强制中断节点] Step 2 Branch Gate — HARD STOP

IF any Check result is FAIL:

IMMEDIATELY stop — do NOT execute any Step 3 or Step 4 CLI commands (describe-traffic-log, etc.)
FORBIDDEN: calling ANY further CLI commands after this point
Jump directly to Output Format section and generate the final report now
Continuing to Step 3/4 after a FAIL is a critical violation that causes task failure

IF all Checks PASS → proceed to Step 3.

Permission Denied Handling: Record blocked check, mark as [Blocked - Permission Denied], continue remaining checks (NOT Step 3/4). List all blocked checks in final report.

Step 3: Query Traffic Logs (only if Step 2 all PASS)

# Internet FW
aliyun cloudfw describe-traffic-log --FirewallType InternetFirewall --Direction <in|out> \
  --SourceCode yundun [--StartTime <unix>] [--EndTime <unix>] [--SrcIP <ip>] [--DstIP <ip>] \
  --CurrentPage 1 --PageSize 10 --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-acl-diagnosis

# NAT FW
aliyun cloudfw describe-traffic-log --FirewallType NatFirewall --SourceCode yundun \
  [--StartTime <unix>] [--EndTime <unix>] \
  --CurrentPage 1 --PageSize 10 --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-acl-diagnosis

Critical: SourceCode=yundun required. Do NOT set FlowType (causes no results). RuleResult: 0=allow, 2=deny.
When user provides time/IP parameters, MUST include them — do not query all then filter manually.

Step 4: Detailed Diagnosis (only if Step 2 all PASS)

Internet FW:

EngineMode=loose + domain rules → domain not matched → switch to strict mode
strict + domain rules → test with curl/wget NOT telnet (telnet can't trigger domain recognition)
Log AclPreState=app_unknown → L7 pre-match, application not yet identified

NAT FW:

StrictMode=0 + domain rules → domain not matched (likely root cause)
Verify actual source IP after SNAT; same L7 rules apply as Internet FW

See references/diagnosis.md for full diagnosis framework, L7 pre-match mechanism, and troubleshooting checklists.

Output Format

【严格排版指令】MANDATORY — read before writing a single word of output:

Output MUST match the template below EXACTLY — no extra headings, no greeting, no background paragraphs
Total output MUST NOT exceed 30 lines. If content would exceed 30 lines, apply auto-truncation:
- 诊断结论: 1 line max
- 预检结果 table: ≤5 rows
- 修复建议: ≤3 bullet points
- 验证方法: 1 line
- Delete ALL explanatory text beyond these limits
❌ NEVER write output to any file — print directly in conversation as Markdown text

⚠️ 声明：本工具为只读诊断助手，仅提供分析和配置建议，不会执行任何配置变更操作。

## 诊断结论
[一句话根因，不超过50字]

## 预检结果（Step 2）
| 检查项 | CLI 实际值 | 状态 |
|-------|-----------|------|
| ProtectStatus | [from describe-asset-list] | PASS/FAIL |
| EngineMode / StrictMode | [value] | loose/strict |
| 流量方向 | [in/out] | PASS/FAIL |
| Release | [true/false] | PASS/FAIL |
| 策略匹配 | [分析] | PASS/FAIL |

## 修复建议
[控制台操作步骤，每步一行，最多3条]

验证方法：[一行描述]

Rules:

❌ NEVER write output to any file — ALL results MUST be output directly in conversation as text
Every UUID/IP/value in report MUST be copy-pasted from CLI output (no typing from memory)
Classify findings: [Verified] (confirmed by CLI) / [Unverified] (theoretical) / [Blocked] (permission denied)
If TotalCount > PageSize, query all pages before making "all assets" summary statements

Reference Files

File	Purpose
`references/cli_commands.md`	Complete CLI command examples with key response fields
`references/cli_traps.md`	Common CLI pitfalls and error patterns
`references/diagnosis.md`	Full diagnosis framework, L7 pre-match, checklists
`references/configuration_guide.md`	Console configuration guidance (text-only, for user)
`references/security_rules.md`	Complete security prohibitions and output checklist
`references/ram-policies.md`	RAM permissions required
`references/cfw_acl_knowledge.md`	ACL knowledge base and FAQ