Aruba Iap Publish

Comprehensive Aruba Instant AP (IAP) configuration management with automatic baseline capture, rollback support, and health monitoring. Supports device discovery, configuration snapshots, SSID management, and safe configuration changes with interactive config mode.

Aruba IAP Configuration Manager

Comprehensive Aruba Instant AP (IAP) configuration management with automatic baseline capture, rollback support, and health monitoring.

Features

✨ Core Capabilities

• Device Mode Detection: Automatically detects Virtual Controller, Single-Node Cluster, or Standalone AP mode
• Configuration Snapshots: Full configuration capture with structured JSON output
• Safe Configuration Changes: Apply changes with automatic baseline capture and rollback support
• Comprehensive Monitoring: 40+ monitoring commands across 10 categories
• Risk Assessment: Automatic risk evaluation for configuration changes
• Secret Management: Secure secret references (no plain-text passwords)
• Change History: Full audit trail with timestamped artifacts
• Interactive Configuration Mode: Support for Aruba IAP CLI commit model

📊 Configuration Change Types

Type	Risk	Description
ssid_profile	Medium	Create complete SSID profile with WPA2-PSK-AES
ssid_delete	High	Remove existing SSID profile
snmp_community	Low	SNMP community configuration
snmp_host	Low-Medium	SNMP host/trap destination
syslog_level	Low	Syslog logging levels
auth_server	Medium	RADIUS/CPPM authentication server
ap_allowlist	Medium	Add/remove APs from allowlist
wired_port_profile	Medium	Wired port configuration
ntp	Low	NTP server configuration
dns	Low	DNS server configuration
rf_template	Low	RF template application

Quick Start

1. Installation

bash

# Clone or download the skill
cd ~/.openclaw/workspace/skills/aruba-iap-publish

# Run install script
./install.sh

# Verify installation
iapctl --help

2. Basic Usage

bash

# Device Discovery
iapctl discover --cluster office-iap --vc 192.168.20.56 --out ./out

# Configuration Snapshot
iapctl snapshot --cluster office-iap --vc 192.168.20.56 --out ./out

# Verify Configuration
iapctl verify --cluster office-iap --vc 192.168.20.56 --level basic --out ./out

3. Add SSID

bash

# Create SSID configuration JSON
cat > add-ssid.json << 'EOF'
{
  "changes": [
    {
      "type": "ssid_profile",
      "profile_name": "MyWiFi",
      "essid": "MyNetwork",
      "opmode": "wpa2-psk-aes",
      "wpa_passphrase": "MySecurePassword123",
      "vlan": 1,
      "rf_band": "all"
    }
  ]
}
EOF

# Generate diff
iapctl diff --cluster office-iap --vc 192.168.20.56 \
  --in add-ssid.json --out ./diff

# Apply changes
iapctl apply --cluster office-iap --vc 192.168.20.56 \
  --change-id $(cat diff/commands.json | jq -r '.change_id') \
  --in diff/commands.json --out ./apply

4. Delete SSID

bash

# Create delete SSID configuration JSON
cat > delete-ssid.json << 'EOF'
{
  "changes": [
    {
      "type": "ssid_delete",
      "profile_name": "OldSSID"
    }
  ]
}
EOF

# Generate diff
iapctl diff --cluster office-iap --vc 192.168.20.56 \
  --in delete-ssid.json --out ./diff

# Apply changes
iapctl apply --cluster office-iap --vc 192.168.20.56 \
  --change-id $(cat diff/commands.json | jq -r '.change_id') \
  --in diff/commands.json --out ./apply

5. Monitor Device

bash

# Monitor all categories
iapctl monitor --cluster office-iap --vc 192.168.20.56 --out ./monitor

# Monitor specific categories
iapctl monitor --cluster office-iap --vc 192.168.20.56 \
  -c "system ap clients wlan" --out ./monitor

Configuration Modes

Supported Device Modes

1. Virtual Controller Mode

   • Manages multiple IAPs
   • Full CLI command set available

2. Single-Node Cluster Mode ✨ NEW

   • Single IAP with VC configuration
   • Supports interactive config mode
   • configure terminal → config commands → commit apply

3. Standalone AP Mode

   • Individual AP without cluster
   • Basic configuration available

Interactive Configuration Mode

For Aruba IAP devices, configuration uses the CLI commit model:

1. Enter configuration mode: configure terminal
2. Enter sub-mode (e.g., wlan ssid-profile <name>)
3. Configure parameters (flat commands, no indentation)
4. Exit sub-mode: exit
5. Exit configuration mode: exit
6. Save configuration: write memory
7. Apply configuration: commit apply

Risk Assessment

iapctl automatically assesses risks for each change set:

Risk Levels

• low: Minimal impact, safe to apply
• medium: May affect connectivity, review recommended
• high: Major changes, requires careful planning

Common Warnings

• Removing WLAN or RADIUS configuration may disconnect users
• WPA passphrase changes will require clients to re-authenticate
• AP allowlist changes may prevent APs from joining the cluster
• VLAN changes may affect network connectivity
• Large number of changes - consider applying in stages

Best Practices

1. Use Secret References

Always use secret_ref for passwords and keys:

json

{
  "type": "auth_server",
  "server_name": "radius-primary",
  "ip": "10.10.10.10",
  "secret_ref": "secret:radius-primary-key"
}

Never commit plain-text secrets to version control.

2. Review Risk Assessment

Always review risk.json before applying changes:

bash

cat diff/risk.json

3. Use Dry Run First

Test with --dry-run to verify commands without applying:

bash

iapctl apply --dry-run ...

4. Verify After Changes

Always run verify after applying changes:

bash

iapctl verify --level full ...

5. Apply Changes in Stages

For large change sets, break them into smaller batches:

• Stage 1: SNMP and syslog configuration
• Stage 2: Authentication servers
• Stage 3: SSID profiles
• Stage 4: AP allowlist and wired ports

Testing

Comprehensive testing performed on real hardware:

• ✅ Device discovery and mode detection
• ✅ Configuration snapshot with multiple artifacts
• ✅ Configuration diff generation
• ✅ SSID profile addition
• ✅ SSID profile deletion
• ✅ Configuration apply with interactive mode
• ✅ Configuration verification
• ✅ Health monitoring
• ✅ Risk assessment
• ✅ AP allowlist management

Test Results: 10/11 tests passed (91%)

Known Issues & Limitations

Rollback Functionality

• Status: Partially working
• Issue: Rollback command execution has limitations
• Impact: Low - can be done manually if needed
• Workaround: Use no <command> for manual rollback

Post-Apply Verification

• Status: Sometimes times out
• Issue: show running-config after commit apply can timeout
• Impact: Minimal - configuration is applied successfully
• Workaround: Wait a few seconds and retry

Changelog

v1.1.1 (2026-02-23)

• ✅ Add ssid_delete change type
• ✅ Add send_config_and_apply() method
• ✅ Add send_config_commands() method
• ✅ Update diff_engine.py for flat command generation
• ✅ Fix Result action pattern for 'monitor'
• ✅ Support Aruba IAP single-node cluster mode
• ✅ Comprehensive testing on real hardware

v1.1.0 (2026-02-23)

• ✅ Initial release with core functionality
• ✅ Device discovery and mode detection
• ✅ Configuration snapshots
• ✅ SSID profile management
• ✅ Configuration diff and apply
• ✅ Risk assessment
• ✅ Health monitoring

Requirements

• Python 3.8+
• scrapli[paramiko] for SSH connections
• Aruba Instant AP 6.x, 8.x, or AOS 10.x

License

MIT License - See LICENSE file for details

Support

For issues, questions, or contributions:

• ClawHub: https://clawhub.com/skills/aruba-iap
• Documentation: See docs/ folder
• Examples: See examples/ folder