Censgate OpenClaw Redact

---

Features

• Engine-backed — Detection and policy live in censgate/redact (redact-api), not duplicated in TypeScript
• HTTP only — No bundled regex/ML; you point the plugin at a Redact API (local or remote)
• Sensible defaults — Reversible redaction against a configured or local Redact API endpoint
• Opt-in Docker helper — For trusted local development, the plugin can start or reuse ghcr.io/censgate/redact:full, discover the mapped port, and retry
• OpenClaw-native — preLLMHook / postLLMHook integration with per-turn token storage for restore

This package does not implement local pattern matching. It wraps the upstream engine and applies redaction/restoration in OpenClaw hooks.

Requirements

• Node.js >= 22.14.0 (see engines in package.json)
• OpenClaw with plugin support, compatible with this package’s OpenClaw peer range
• A running Redact HTTP API. For local development, start the Redact full image (ghcr.io/censgate/redact:full) with ONNX-capable NER, or point the plugin at a hosted redact-api using REDACT_API_ENDPOINT / http.endpoint.
• Optional: Docker, only if you explicitly enable the plugin's Docker auto-start helper for a trusted local environment.

Quick start

1. Install the plugin

openclaw plugins install @censgate/openclaw-redact

2. Start or configure Redact

By default the plugin is enabled, uses reversible redaction, and calls http://127.0.0.1:8080. Start Redact yourself or set REDACT_API_ENDPOINT / http.endpoint to an existing trusted Redact API.

3. Optional — if you use a plugin allowlist, allow the plugin id and ensure it is enabled:

{
  "plugins": {
    "allow": ["censgate-redact"],
    "entries": {
      "censgate-redact": { "enabled": true }
    }
  }
}

Local Redact with Docker: start the API yourself, then align the endpoint:

docker run --rm -p 8080:8080 ghcr.io/censgate/redact:full
# Plugin defaults expect http://127.0.0.1:8080 (or set REDACT_API_ENDPOINT).

Optional auto-start: in trusted local development only, enable Docker auto-start with REDACT_DOCKER_AUTOSTART=true or http.docker.enabled: true.

Installation

• From npm (recommended for users): openclaw plugins install @censgate/openclaw-redact (or npm install -g / npx patterns your OpenClaw version documents).
• From source (contributors): clone this repo, run npm install, npm run build, then point OpenClaw at the built extension per OpenClaw’s local-plugin instructions.

Package id in OpenClaw: censgate-redact (see openclaw.plugin.json).

Backend

• Protocol: HTTP only to Redact’s REST API
• Engine: redact-api from censgate/redact
• Recommended image (pattern + ONNX NER): ghcr.io/censgate/redact:full — used by manual Docker runs and the opt-in Docker auto-start helper

How it works

1. preLLMHook calls POST /api/v1/analyze on the Redact API.
2. Detected spans are replaced with [REDACTED:<ENTITY_TYPE>:<id>] placeholders in reversible mode (or non-reversible placeholders in irreversible mode).
3. postLLMHook restores reversible placeholders using per-turn token storage.

Reversible mode and memory: Restoration uses an in-memory map from placeholder to original substring for the current turn. The plugin does not encrypt those token entries or persist them to disk. Any process with access to the OpenClaw gateway memory could read them while they exist. For workflows where placeholders must not be reversible, use mode: "irreversible".

Configuration

Default behavior (out of the box)

With no custom config, the plugin typically:

• Stays enabled; reversible mode; no agent exclude list; redaction logging off
• Calls the configured Redact HTTP API endpoint, defaulting to http://127.0.0.1:8080
• Leaves Docker auto-start disabled unless explicitly enabled via env or config
• Keeps the Docker helper defaults available when opted in: image ghcr.io/censgate/redact:full, dynamic host port when hostPort is unset, and restart-on-failure behavior
• Leaves entityTypes unset so Redact applies its full built-in recognizer set (broad PII / HIPAA / GDPR–oriented coverage)

When Docker auto-start is explicitly enabled

• The plugin attempts a Redact API call first.
• If unreachable, it auto-starts or reuses the container, detects the mapped host port (including dynamic assignment), updates the runtime endpoint, and retries.
• If the backend becomes unreachable while OpenClaw is running, it can retry bootstrap and optionally restart the container.

Advanced / production (optional)

For sustained load, use an existing Redact endpoint, pin a stable host port if using Docker, raise timeouts, and optionally pre-pull the image. Example:

{
  "plugins": {
    "entries": {
      "censgate-redact": {
        "enabled": true,
        "config": {
          "mode": "reversible",
          "excludeAgents": [],
          "logRedactions": false,
          "http": {
            "endpoint": "http://127.0.0.1:18080",
            "timeoutMs": 3000,
            "language": "en",
            "docker": {
              "enabled": true,
              "image": "ghcr.io/censgate/redact:full",
              "containerName": "openclaw-redact-api",
              "host": "127.0.0.1",
              "hostPort": 18080,
              "containerPort": 8080,
              "pull": true,
              "restartOnFailure": true,
              "startupTimeoutMs": 45000,
              "startupProbeIntervalMs": 500
            }
          }
        }
      }
    }
  }
}

Notes: Keep entityTypes unset unless you need a narrower scope. Use mode: "irreversible" for strictly untrusted downstream workflows. For multiple OpenClaw instances on one host, use unique containerName and hostPort values.

Environment variables

All variables below are optional configuration overrides. None are required for the plugin to run with defaults, and none are cloud or provider credentials. The plugin does not read REDACT_ENCRYPTION_KEY, REDACT_PERFORMANCE_MODE, or other undocumented REDACT_* names.

Variable	Role
REDACT_API_ENDPOINT	Redact base URL (default: http://127.0.0.1:8080)
REDACT_ENTITY_TYPES	Comma-separated entity filter (optional)
REDACT_DOCKER_AUTOSTART	true|false (default: false)
REDACT_DOCKER_IMAGE	Default: ghcr.io/censgate/redact:full
REDACT_DOCKER_CONTAINER_NAME	Default: openclaw-redact-api
REDACT_DOCKER_HOST	Default: 127.0.0.1
REDACT_DOCKER_HOST_PORT	Optional; omit for dynamic port
REDACT_DOCKER_CONTAINER_PORT	Default: 8080
REDACT_DOCKER_PULL	true|false (default: false)
REDACT_DOCKER_RESTART_ON_FAILURE	true|false (default: true)
REDACT_DOCKER_STARTUP_TIMEOUT_MS	Default: 30000
REDACT_DOCKER_STARTUP_PROBE_INTERVAL_MS	Default: 500

Development

npm install
npm run build
npm test

Clean build artifacts and pack tarballs: make clean (or npm run clean).

Testing & verification

This repository keeps package-local checks only:

npm run build
npm run typecheck
npm run lint
npm test

Docker-backed Redact verification, OpenClaw gateway E2E tests, mock LLM fixtures, and latency benchmarks live in censgate/openclaw-redact-benchmark. See docs/VERIFICATION.md for details.

Latency benchmark

Latency probes are maintained in censgate/openclaw-redact-benchmark so the published plugin source remains focused on runtime code.

Documentation

• Verification & E2E — ports, images, matrix tests
• Contributing — PRs, dev setup, security contact
• Censgate Redact (engine) — API, Docker images, entity types, CLI
• Issues — bugs and feature requests

Contributing

We welcome contributions. See CONTRIBUTING.md for setup, npm run lint / typecheck / test, and the security reporting process.

License

Apache License 2.0.

Support

• GitHub Issues — bugs and feature requests
• Engine / API questions: censgate/redact and its docs
• For security issues, follow CONTRIBUTING.md (do not use public issues for sensitive reports)

---

Star on GitHub if this plugin is useful to you.