Hang Seng Indexes Monitor

Monitor Hang Seng Indexes (hsi.com.hk) press releases, index/other notices, insights, and reports; detect newly published items, match them bilingually (EN + 中文) against the user's indexes (default HSI/HSCEI/HSTECH), and produce one concise digest per run. Use when the user wants to watch HSI announcements or run a scheduled Hang Seng Indexes news check. Agent-driven, no Python or compiled code — only curl, jq, and standard shell tools.

HSIL Monitor (agent-native, zero-code)

You (the agent) perform the whole cycle by following this document: fetch the Hang Seng Indexes sources, detect what is new since last run, decide what is relevant, and emit a digest as your final message. You do not send or route the message — OpenClaw delivers your output (the scheduled job's announce routing). This skill contains no channel and no credentials.

Tools used: curl, jq, and coreutils (sort, awk, sed, date, mv).

Storage — READ THIS FIRST

All reads and writes happen in one writable, per-user home directory, never in the skill's install folder (that folder may be read-only and its location is not reliably discoverable from a shell command). This matches the convention other OpenClaw skills use (~/.config/<skill>/).

Resolve the SAME paths at the very start of every action (setup, run, backfill, doctor) with this exact block — it is a deterministic rule, so the skill always knows where its files are without discovery or a pointer file:

bash

HOME_DIR="${HSIL_MONITOR_HOME:-$HOME/.config/hsil-monitor}"
WORK="$HOME_DIR/work"
mkdir -p "$WORK"
CFG="$HOME_DIR/config.json"     # settings
SEEN="$HOME_DIR/seen.txt"       # dedup state: one seen item URL per line
LAST="$HOME_DIR/last_run.txt"   # ISO-8601 UTC timestamp of last run
UA="Mozilla/5.0 hsil-monitor"

• $HSIL_MONITOR_HOME overrides the location; otherwise it defaults to ~/.config/hsil-monitor, writable on any machine and surviving reinstalls.
• All scratch files go in $WORK (not /tmp), so a locked-down /tmp can't break the skill. Clean $WORK at the start of each run.
• Write config/state atomically: write "$CFG.tmp", then mv "$CFG.tmp" "$CFG".
• Do not use $0/dirname to find a path, and do not write inside the skill folder.

What lives where

• config.json (in $HOME_DIR) — settings, created at setup. Schema:

  json

  {
    "timezone": "Asia/Hong_Kong",
    "schedule_time": "08:30",
    "languages": ["en", "zh"],
    "indexes": ["HSI", "HSCEI", "HSTECH"],
    "extra_keywords": [],
    "backfill_days": 30,
    "deep_read": false,
    "sources": [
      {"type": "Press release", "page": "https://www.hsi.com.hk/en-hk/media-room/#press-releases",     "tab_title": "Press Releases"},
      {"type": "Notice",        "page": "https://www.hsi.com.hk/en-hk/media-room/#index-other-notices", "tab_title": "Index / Other Notices"},
      {"type": "Insight",       "page": "https://www.hsi.com.hk/en-hk/insights-and-reports/#insights",   "tab_title": "Insights"},
      {"type": "Report",        "page": "https://www.hsi.com.hk/en-hk/insights-and-reports/#reports",    "tab_title": "Reports"}
    ]
  }
  

  The four source pages are the only fixed site locations; the JSON data endpoints are discovered at runtime from each page's model. config.example.json in the skill folder is a read-only reference copy of this schema.

Delivery is intentionally absent: the skill emits text; OpenClaw routes it.

---

PROCEDURE — one monitoring cycle ("run")

1. Resolve storage, load config, prep state

bash

HOME_DIR="${HSIL_MONITOR_HOME:-$HOME/.config/hsil-monitor}"; WORK="$HOME_DIR/work"
mkdir -p "$WORK"; CFG="$HOME_DIR/config.json"; SEEN="$HOME_DIR/seen.txt"; LAST="$HOME_DIR/last_run.txt"
UA="Mozilla/5.0 hsil-monitor"
[ -f "$CFG" ] || { echo "No config at $CFG — run setup first."; exit 1; }
BACKFILL_DAYS=$(jq -r '.backfill_days // 30' "$CFG")
: > "$WORK/all.tsv"
touch "$SEEN"
FIRST_RUN=0; [ -s "$SEEN" ] || FIRST_RUN=1

2. For each source: discover data endpoints, then fetch items

Always fetch to a file and validate it is JSON before piping to jq. Some networks return an HTML bot/geo/WAF challenge or a redirect with HTTP 200; feeding that to jq causes a jq: parse error. Validate first, skip-with-warning. Rows are TSV: type <TAB> date <TAB> absolute_url <TAB> title.

bash

jq -c '.sources[]' "$CFG" | while read -r S; do
  TYPE=$(jq -r '.type' <<<"$S"); PAGE=$(jq -r '.page' <<<"$S"); TAB=$(jq -r '.tab_title' <<<"$S")
  MODEL="$(printf '%s' "$PAGE" | sed 's/#.*$//; s#/\{0,1\}$##').model.json"

  curl -sSL --retry 2 --max-time 30 -A "$UA" -H 'Accept: application/json' -o "$WORK/model.json" "$MODEL"
  if ! jq -e . "$WORK/model.json" >/dev/null 2>&1; then
    echo "WARN: model not JSON for '$TAB' ($MODEL) — block or drift; skipping source" >&2; continue
  fi
  PATHS=$(jq -r --arg t "$TAB" '.. | objects | select(has("tabs")) | .tabs[]
            | select(.tabTitle==$t) | .sourceConfigs[]?.customDataPath' "$WORK/model.json" | sort -u)
  [ -z "$PATHS" ] && echo "WARN: no data paths discovered for '$TAB'" >&2

  for P in $PATHS; do
    U="https://www.hsi.com.hk$P"
    code=$(curl -sSL --retry 2 --max-time 30 -A "$UA" -H 'Accept: application/json' -o "$WORK/src.json" -w '%{http_code}' "$U")
    if [ "$code" != 200 ] || ! jq -e . "$WORK/src.json" >/dev/null 2>&1; then
      echo "WARN: skipped $P (http $code / not JSON) — first bytes: $(head -c 80 "$WORK/src.json" | tr -d '\n')" >&2
      continue
    fi
    jq -r --arg t "$TYPE" '(.contentList // [])[]? | (.resourcesList // [])[]?
        | select(.title != null)
        | [$t, (.lastUpdate[0:10]), ("https://www.hsi.com.hk" + .url), .title] | @tsv' \
      "$WORK/src.json" >> "$WORK/all.tsv"
  done
done
sort -u -o "$WORK/all.tsv" "$WORK/all.tsv"

Resilience: a bad/blocked/malformed file is skipped with a WARN (surface these in the digest's health line); only treat the run as broken if every fetch failed. The // [] guards mean an unexpected shape yields no rows, not an error.

3. Compute new items (dedup by URL, column 3)

Read the seen-set in BEGIN via getline so it is correct even when $SEEN is empty (the NR==FNR trick breaks on an empty first file):

bash

awk -F'\t' -v seenf="$SEEN" 'BEGIN{while((getline l < seenf) > 0) seen[l]=1} !($3 in seen)' \
  "$WORK/all.tsv" > "$WORK/new.tsv"

4. First-run backfill window

On the first run ($SEEN empty) narrow what you report to the recent window; you still seed all fetched URLs in step 8, so later runs only show newer items:

bash

if [ "$FIRST_RUN" = 1 ]; then
  CUT=$(date -u -d "-${BACKFILL_DAYS} days" +%F 2>/dev/null || date -u -v-"${BACKFILL_DAYS}"d +%F)
  awk -F'\t' -v c="$CUT" '$2 >= c' "$WORK/new.tsv" > "$WORK/show.tsv"
else
  cp "$WORK/new.tsv" "$WORK/show.tsv"
fi

5. Read the candidates and match (you do this — no code)

cat "$WORK/show.tsv" — small, only new items. For each row decide which of the user's indexes it concerns, per MATCHING RULES below. Record matched index codes and the language matched. (Optional bilingual recall: also fetch the Chinese data files — same paths with /data/eng/ → /data/chi/ — and match titles by URL filename stem. English titles usually already carry the tickers.)

6. Optional deep-read

If config.deep_read is true, for up to ~5 matched PDF items you may curl -sSL "<url>" -o "$WORK/item.pdf" and read it for a one-sentence summary. Skip silently if you cannot read PDFs. Never deep-read unmatched items.

7. Compose the digest (your final message)

Group matched items by source type in this order: Press release, Notice, Insight, Report (all equal weight). Collapse unmatched-new into a count. Use the DIGEST FORMAT below. If there are no matched items and no warnings, output one short line (e.g. HSIL monitor: no new matched items today (checked N sources).). Emit the digest as your final response — do not send it anywhere.

8. Persist state (atomic)

Seed every URL fetched this run so nothing re-alerts:

bash

cut -f3 "$WORK/all.tsv" >> "$SEEN"
sort -u "$SEEN" -o "$SEEN"
date -u +%FT%TZ > "$LAST"

---

MATCHING RULES (bilingual)

Match each new item's title (and Chinese title / deep-read text if available) against the configured indexes:

Index	English	中文 (Traditional + Simplified)
HSI	HSI, Hang Seng Index	恒生指數, 恒生指数
HSCEI	HSCEI, Hang Seng China Enterprises Index, China Enterprises Index	恒生中國企業指數, 恒生中国企业指数, 國企指數, 国企指数
HSTECH	HSTECH, HSTI, Hang Seng TECH Index, Hang Seng TECH	恒生科技指數, 恒生科技指数, 科技指數

Plus any extra_keywords. Guidance:

• Treat English abbreviations (HSI, HSTECH) as whole tokens, not substrings.
• Exclude the publisher's own name. "Hang Seng Indexes Company / Limited", "恒生指數公司", "恒生指數有限公司" appear in almost every title and must not by themselves count as an HSI match. Count HSI only when the title refers to the index (e.g. "Hang Seng Index Advisory Committee", "恒生指數半年度檢討").
• An "Index Review Results" / "指數檢討結果" item names indexes in its PDF body — if deep_read is on, use that; otherwise leave it in the unmatched-new count.
• Record matches like HSTECH (en) or 恒生科技指數 (zh).

---

DIGEST FORMAT (plain text)

text

Hang Seng Indexes — Daily Digest
<YYYY-MM-DD HH:MM TZ>            # now, in config.timezone

⚠ HEALTH: <only if a source failed / structure drift / all-empty>

New: Press <n> · Notice <n> · Insight <n> · Report <n>

── Press release (<k>) ──
• <title>
  <date> · <tag if any> · matched: <labels>
  中文: <chinese title if fetched>
  "<one-line summary if deep-read>"
  <url>
... (Notice, Insight, Report in that order) ...

(+ <m> other new item(s) not matching your indexes)

Health: OK ✅   # or: SEE ALERTS ABOVE ⚠

---

PROCEDURE — setup (agent-led)

You are the interactive layer: ask the user, then write config.json.

1. Resolve storage and prove it is writable; tell the user where files will live:

   bash

   HOME_DIR="${HSIL_MONITOR_HOME:-$HOME/.config/hsil-monitor}"; mkdir -p "$HOME_DIR/work"
   if ! ( : > "$HOME_DIR/.wtest" && rm -f "$HOME_DIR/.wtest" ); then
     echo "ERROR: $HOME_DIR is not writable. Set HSIL_MONITOR_HOME to a writable path and re-run setup." ; exit 1
   fi
   echo "Config + state will be stored in: $HOME_DIR"
   

   Report that path to the user in chat.
2. Run DOCTOR and report gaps.
3. Ask (offer defaults): timezone; daily time; indexes; extra keywords; bilingual or English-only; backfill days (default 30); deep-read on/off.
4. Write $HOME_DIR/config.json from the schema above with their answers, using jq and an atomic mv (write config.json.tmp, then mv).
5. Offer to run a backfill now (BACKFILL below).
6. Offer to install the schedule (SCHEDULE below). Confirm before creating.

PROCEDURE — backfill

Run one normal cycle with FIRST_RUN forced to 1 so only the recent backfill_days window is reported, then all history is seeded into $SEEN. Emit the windowed digest as your final message.

PROCEDURE — schedule

Create a daily OpenClaw cron job that triggers this skill. Read schedule_time and timezone from config, convert HH:MM → cron M H * * *, confirm with the user, then run — embedding the resolved storage path in the message so every scheduled run uses the exact same location:

bash

HOME_DIR="${HSIL_MONITOR_HOME:-$HOME/.config/hsil-monitor}"
openclaw cron add \
  --name hsil-monitor-daily \
  --description "Daily Hang Seng Indexes digest" \
  --cron "<M> <H> * * *" \
  --tz "<timezone>" \
  --tools exec \
  --announce \
  --message "Run the hsil-monitor skill now: set HSIL_MONITOR_HOME=$HOME_DIR, perform one monitoring cycle exactly as its SKILL.md describes, and output the digest as your final message."

Delivery/routing is OpenClaw's responsibility (--announce); this skill names no channel. Inspect with openclaw cron list; remove with openclaw cron rm --name hsil-monitor-daily.

PROCEDURE — doctor

Report PASS/WARN/FAIL for:

• command -v curl jq — required tools.
• Write access to $HOME_DIR (write a temp file there and delete it).
• Reachability + discovery: for one source, derive the model URL and confirm the customDataPath discovery returns ≥1 path and the data file parses as JSON.
• command -v openclaw — needed only for scheduling.
• Whether $HOME_DIR/config.json exists (else: run setup).

---

Notes & guarantees

• One writable home ($HOME/.config/hsil-monitor, override HSIL_MONITOR_HOME) holds config, state, and scratch. Nothing is read/written in the skill folder, and the path is known by rule at every run — no $0, no discovery, no pointer.
• Portable / no hardcode: only the four source pages are fixed (in config); data endpoints are discovered each run. No credentials, no channel.
• Idempotent: dedup is by item URL in seen.txt; re-running never re-reports.
• Fails soft: a blocked/broken source is skipped with a health warning.
• Quiet by design: quiet days produce a one-line message, not silence/noise.