OpenClaw Rescue Gateway Skill.md

为 OpenClaw 配置稳定可维护的 Rescue Gateway。适用于主 Gateway 已存在、需要第二个 Discord Rescue Bot、需要独立端口和独立 launchd label、需要避免主 gateway stop 误伤 rescue gateway、需要默认 full exec 权限且不走审核的场景。

Rescue Gateway 2.0

当主 Gateway 故障时，Rescue Gateway 提供独立入口。此版本的目标不是“能跑起来”，而是“能长期维护，不和主 Gateway 互相干扰”。

适用场景

• 已安装 OpenClaw 主 Gateway
• 需要第二个 Discord Bot，名称如 OpenClaw Rescue Bot
• 需要 Rescue Gateway 独立运行在 19001
• 需要默认 exec 全权限且不审核
• 需要避免 openclaw gateway stop 把 rescue 一起停掉

结论先行

Rescue Gateway 的推荐落地方式是：

• 配置目录使用官方 profile：~/.openclaw-rescue/openclaw.json
• CLI 使用官方 profile：openclaw --profile rescue ...
• 服务不用官方默认 label ai.openclaw.rescue
• 服务改用独立 launchd label：ai.openclaw.gateway.rescue

原因：

• profile 配置目录是对的，后续维护简单
• 但在实际使用中，官方 profile service 的 gateway stop 可能和主 gateway 生命周期串扰
• 独立 label 可以把 rescue 的启动/停止边界切干净

目录和端口

项目	主 Gateway	Rescue Gateway
Config	~/.openclaw/openclaw.json	~/.openclaw-rescue/openclaw.json
State	~/.openclaw	~/.openclaw-rescue
Workspace	~/.openclaw/workspace	~/.openclaw-rescue/workspace
Port	18789	19001
launchd label	ai.openclaw.gateway	ai.openclaw.gateway.rescue

端口必须至少错开 20。OpenClaw 会派生浏览器和调试端口，不能重叠。

Rescue Config

优先做法：以主配置为模板，写入 ~/.openclaw-rescue/openclaw.json。

关键要求：

• channels.discord.token 使用 Rescue Bot token
• gateway.port 使用 19001
• agents.defaults.workspace 使用 ~/.openclaw-rescue/workspace
• agents.list[0].agentDir 使用 ~/.openclaw-rescue/agents/rescue/agent
• tools.exec.security = "full"
• tools.exec.ask = "off"
• agents.defaults.elevatedDefault = "full"
• plugins.entries.acpx.enabled = true
• plugins.entries.acpx.config.permissionMode = "approve-all"

最小关键片段：

json

{
  "agents": {
    "defaults": {
      "elevatedDefault": "full",
      "workspace": "/Users/YOUR_NAME/.openclaw-rescue/workspace"
    },
    "list": [
      {
        "id": "rescue",
        "workspace": "/Users/YOUR_NAME/.openclaw-rescue/workspace",
        "agentDir": "/Users/YOUR_NAME/.openclaw-rescue/agents/rescue/agent",
        "subagents": { "allowAgents": ["*"] }
      }
    ]
  },
  "bindings": [
    {
      "agentId": "rescue",
      "match": { "channel": "discord" }
    }
  ],
  "tools": {
    "profile": "full",
    "exec": {
      "security": "full",
      "ask": "off"
    }
  },
  "channels": {
    "discord": {
      "enabled": true,
      "token": "YOUR_RESCUE_BOT_TOKEN"
    }
  },
  "gateway": {
    "port": 19001,
    "mode": "local",
    "bind": "loopback",
    "auth": {
      "mode": "token",
      "token": "YOUR_RESCUE_GATEWAY_TOKEN"
    }
  },
  "plugins": {
    "entries": {
      "acpx": {
        "enabled": true,
        "config": {
          "permissionMode": "approve-all"
        }
      }
    }
  }
}

Rescue Agent Auth

Rescue agent 使用独立 agentDir，不会自动继承主 agent 的认证。

如果 rescue bot 能登录 Discord，但回复时报：

• No API key found for provider "anthropic"
• No API key found for provider "kimi-coding"

就把主 agent 的认证复制过去：

bash

cp ~/.openclaw/agents/main/agent/auth-profiles.json \
  ~/.openclaw-rescue/agents/rescue/agent/auth-profiles.json

chmod 600 ~/.openclaw-rescue/agents/rescue/agent/auth-profiles.json

Rescue LaunchAgent

不要用官方默认 profile service label。

使用自定义 plist：

• 路径：~/Library/LaunchAgents/ai.openclaw.gateway.rescue.plist
• label：ai.openclaw.gateway.rescue
• 启动参数包含：--profile rescue gateway --port 19001
• 环境变量必须包含：
  • OPENCLAW_PROFILE=rescue
  • OPENCLAW_STATE_DIR=~/.openclaw-rescue
  • OPENCLAW_CONFIG_PATH=~/.openclaw-rescue/openclaw.json
  • OPENCLAW_LAUNCHD_LABEL=ai.openclaw.gateway.rescue

关键原因：

• 配置仍然走官方 profile
• 但 service label 与主 gateway 彻底隔离
• 可避免主 openclaw gateway stop 误伤 rescue

启动与验证

加载 rescue：

bash

launchctl bootstrap gui/$(id -u) ~/Library/LaunchAgents/ai.openclaw.gateway.rescue.plist
launchctl enable gui/$(id -u)/ai.openclaw.gateway.rescue
launchctl kickstart -k gui/$(id -u)/ai.openclaw.gateway.rescue

验证：

bash

OPENCLAW_LAUNCHD_LABEL=ai.openclaw.gateway.rescue \
openclaw --profile rescue gateway status

tail -f ~/.openclaw-rescue/logs/gateway.log

成功标志：

text

[discord] logged in to discord as XXXXX (OpenClaw Rescue Bot)

日常命令

主 gateway：

bash

openclaw gateway stop
openclaw gateway start
openclaw gateway restart
openclaw gateway status

rescue gateway：

bash

OPENCLAW_LAUNCHD_LABEL=ai.openclaw.gateway.rescue \
openclaw --profile rescue gateway stop

OPENCLAW_LAUNCHD_LABEL=ai.openclaw.gateway.rescue \
openclaw --profile rescue gateway start

OPENCLAW_LAUNCHD_LABEL=ai.openclaw.gateway.rescue \
openclaw --profile rescue gateway restart

OPENCLAW_LAUNCHD_LABEL=ai.openclaw.gateway.rescue \
openclaw --profile rescue gateway status

如果只是 emergency 操作，直接用 launchctl 也可以：

bash

launchctl bootout gui/$(id -u) ~/Library/LaunchAgents/ai.openclaw.gateway.rescue.plist
launchctl bootstrap gui/$(id -u) ~/Library/LaunchAgents/ai.openclaw.gateway.rescue.plist

诊断顺序

1. 先看配置是否有效

bash

openclaw --profile rescue config validate

2. 再看 service

bash

OPENCLAW_LAUNCHD_LABEL=ai.openclaw.gateway.rescue \
openclaw --profile rescue gateway status

3. 再看日志

bash

tail -f ~/.openclaw-rescue/logs/gateway.log
tail -f ~/.openclaw-rescue/logs/gateway.err.log

Changelog

2.0.0

• 配置目录从 ~/.openclaw/openclaw-rescue.json 收口到官方 profile 路径 ~/.openclaw-rescue/openclaw.json
• rescue workspace 从 ~/.openclaw/workspace-rescue 收口到 ~/.openclaw-rescue/workspace
• 明确要求复制主 agent auth-profiles.json 到 rescue agentDir
• 增加默认无审核执行配置：
  • tools.exec.security = "full"
  • tools.exec.ask = "off"
  • agents.defaults.elevatedDefault = "full"
  • plugins.entries.acpx.config.permissionMode = "approve-all"
• 明确说明不要直接使用官方默认 rescue service label，改用独立 label ai.openclaw.gateway.rescue
• 新增主/rescue 分离的日常命令

1.0.0 的缺陷

• 使用 ~/.openclaw/openclaw-rescue.json，没有和官方 profile 目录对齐，后续 CLI 管理不统一
• 使用 ~/.openclaw/workspace-rescue，workspace 和 profile state 分裂
• 没有说明 rescue agent 需要单独复制 auth-profiles.json，导致模型认证缺失
• 没有配置默认 exec 全权限和免审核，导致实际运行仍会弹审批
• plugins.entries.acpx 配置缺失或不完整，导致执行行为与预期不一致
• 直接建议自定义 service，但没有解释与官方 --profile rescue 的关系
• 没有指出官方默认 profile service 在实机上可能和主 gateway stop 串扰
• 停止命令仍使用 launchctl unload，不适合当前 OpenClaw 的 service 生命周期

已知现实约束

• openclaw gateway stop 只适合主 gateway
• rescue 若要完全避免被误停，必须配合自定义 label ai.openclaw.gateway.rescue
• openclaw --profile rescue ... 仍然用于 rescue 的配置、状态和 CLI 操作