小红书长图文发布

自动化在小红书网页版发布长图文笔记，支持标题正文填写、一键排版及快速发布，单次耗时约2-3分钟。

Security Scan

The skill is an instruction-only browser automation for publishing on 小红书 and is largely consistent with that purpose, but it asks the agent to rely on and check a local OpenClaw browser config (~/.openclaw/openclaw.json) and elevated browser host control without declaring those config requirements — this mismatch and the implicit elevated browser control are worth reviewing before use.

Purpose & Capability

The name/description (automating Xiaohongshu web publishing) matches the runtime instructions (starting the OpenClaw browser, navigating to the creator site, filling title/body, performing 'one-click layout', and publishing). The use of openclaw CLI/browser actions is expected for a web-automation skill.

Instruction Scope

SKILL.md explicitly instructs the agent to check ~/.openclaw/openclaw.json for specific sandbox/browser settings and to run gateway/browser restart commands. Those instructions require reading/validating local agent/browser configuration and exercising host control over the browser session — actions beyond merely opening a page and clicking UI elements. The skill's manifest did not declare any required config paths, so the instructions access undeclared local configuration.

Install Mechanism

No install spec or code files are present; this is instruction-only, which limits disk write/installation risk. All runtime actions rely on existing OpenClaw tooling already expected on the agent.

Credentials

The skill declares no environment variables or credentials, which is good. However, it references a specific local config path (~/.openclaw/openclaw.json) and requires the OpenClaw browser to have allowHostControl=true and a defaultProfile set. Accessing or requiring local config that may contain other settings or profiles is not declared and increases the scope of what the agent will read or depend on.

Persistence & Privilege

always:false and user-invocable defaults are preserved. The skill does not request permanent 'always' inclusion nor does it instruct modification of other skills or system-wide agent settings. That said, it requires the browser to permit host control, which effectively grants broad ability to automate any page open in that browser profile while running.

Scan Findings in Context

[no-regex-findings] expected: The static regex scanner found nothing because this is an instruction-only skill with no code files to analyze. That absence of findings is expected but not a guarantee of safety; the SKILL.md itself must be evaluated (and was).

What to consider before installing

This skill appears to do what it says (automate publishing on 小红书) and has no code/install footprint, but it expects the OpenClaw browser to be configured for host control and asks you to inspect ~/.openclaw/openclaw.json — a file the skill's manifest did not declare. Before installing or running: 1) review ~/.openclaw/openclaw.json yourself to confirm it contains only settings you expect (and back it up), 2) understand that enabling allowHostControl gives the tooling broad automation power over that browser profile (avoid using a profile with sensitive logged-in sessions), 3) consider testing with a throwaway Xiaohongshu account and an isolated browser profile, and 4) be cautious with snapshots or saved snapshots since they may capture page contents (potentially secrets). If you need stronger assurance, ask the skill author to declare the config path in its manifest or to provide a minimal checklist that does not require reading other local configs.

小红书长图文发布 Skill

功能：自动化完成小红书长图文笔记的完整发布流程
适用场景：需要通过网页版发布纯文字/长图文笔记
预期效果：使用 Skill 后，发布耗时从 15 分钟降至 2-3 分钟

---

前置条件

1. 浏览器配置检查

执行前确认 ~/.openclaw/openclaw.json 包含：

{
  "agents": {
    "defaults": {
      "sandbox": {
        "mode": "non-main",
        "browser": {
          "allowHostControl": true
        }
      }
    }
  },
  "browser": {
    "enabled": true,
    "defaultProfile": "openclaw",
    "headless": false
  }
}

2. 账号状态

• 小红书账号已登录（在 openclaw 浏览器中）
• 已开通创作服务平台权限

---

标准发布流程

Step 1: 启动浏览器并导航（约 30 秒）

// 检查浏览器状态
browser status

// 启动 openclaw 浏览器
browser start --profile openclaw

// 打开创作平台
browser open https://creator.xiaohongshu.com/publish/publish?source=official --profile openclaw

检查点：页面显示"创作服务平台"左侧导航栏

---

Step 2: 进入长文编辑器（约 20 秒）

1. 点击左侧导航 "发布笔记"
2. 点击 "写长文"
3. 点击 "新的创作"

检查点：进入编辑器，显示标题输入框 + 正文区域

---

Step 3: 填写内容（约 30 秒）

// 填写标题（点击标题输入框）
browser act click "输入标题" textbox
browser act type "你的标题"

// 填写正文（点击正文区域）
browser act click paragraph
browser act type "你的正文内容..."

注意事项：

• 标题限制 64 字
• 正文支持 Markdown 格式
• 建议字数 300-800 字

---

Step 4: 一键排版（约 1 分钟）

1. 点击 "一键排版" 按钮
2. 选择版式（推荐第一个版式或根据内容风格选择）
3. 点击 "下一步"

检查点：进入发布预览页面，显示封面、标题、正文预览

---

Step 5: 发布设置（约 20 秒）

可选操作：

• 添加话题标签（点击"话题"按钮）
• 添加地点（点击"添加地点"）
• 勾选"原创声明"

检查点：标题已显示，预览正常

---

Step 6: 发布（约 10 秒）

1. 点击 "发布" 按钮
2. 等待 3-5 秒
3. 点击左侧 "笔记管理" 验证

检查点：笔记管理显示新笔记，状态为"审核中"

---

完整命令序列

# 1. 启动并导航
openclaw browser start --profile openclaw
openclaw browser open https://creator.xiaohongshu.com/publish/publish?source=official --profile openclaw

# 2. 进入编辑器（需根据实际 snapshot 调整 ref）
# - 点击"写长文"
# - 点击"新的创作"

# 3. 填写内容
# - 点击标题 textbox，输入标题
# - 点击正文 paragraph，输入内容

# 4. 排版
# - 点击"一键排版"
# - 选择版式（如 e237）
# - 点击"下一步"

# 5. 发布
# - 点击"发布"按钮
# - 验证：笔记管理中查看

---

常见问题处理

Q1: 浏览器无法连接

现象：Error: Chrome extension relay is running, but no tab is connected 解决：

1. 确保配置中 browser.defaultProfile: "openclaw"
2. 重启 gateway: openclaw gateway restart
3. 重新启动浏览器

Q2: 标签页丢失

现象：targetId 失效，需要重新打开页面 预防：

• 使用稳定的 targetId 跟踪
• 重要操作前保存草稿

Q3: 找不到"发布"按钮

原因：长图文必须先排版才能发布 解决：确保已完成"一键排版"→"选择版式"→"下一步"

Q4: 发布后在哪里查看

路径：笔记管理 → 全部笔记 → 审核中/已发布

---

优化建议

1. 批量发布：如有多篇笔记，可保持在创作平台页面，重复 Step 2-6
2. 草稿利用：长文支持自动保存，意外中断可从草稿箱恢复
3. 版式选择：
   • 情感/故事类：文艺清新、黄昏手稿
   • 职场/干货类：理性现代、清晰明朗
   • 生活/日常类：轻感明快、手帐书写

---

💰 经济性优化（Token 降本）

优化前 vs 优化后

操作	优化前	优化后	节省
浏览器操作	每次操作后 snapshot	关键节点 snapshot	~30% Token
上下文管理	累积到 150K+	每任务后清理	~20% Token
工具调用	多次独立调用	批量执行	~10% Token

推荐操作模式

❌ 低效模式（浪费 Token）：
browser act click → snapshot → browser act type → snapshot → browser act click → snapshot
总 Token：~8K

✅ 高效模式（节省 Token）：
browser act click → browser act type → browser act click → wait 2s → snapshot
总 Token：~3K

关键检查点（只在这几处 snapshot）

1. 页面首次加载完成
2. 内容填写完成（标题+正文）
3. 排版完成、进入预览
4. 发布完成、验证结果

Token 预算

• 单次发布目标：< 5K Token（不含内容创作）
• 对比：无 Skill 时 25K，节省 80%

---

版本记录

版本	日期	更新内容
v1.0	2026-02-28	初始版本，基于 2 次实操经验

---

使用本 Skill 后，预计单次发布耗时：2-3 分钟