Ninebot
PassAudited by ClawScan on May 10, 2026.
Overview
This instruction-only Ninebot skill has no code, install steps, credentials, or detected static issues, but it documents device-changing actions that users should approve carefully.
This appears to be a simple instruction-only guide for Ninebot device troubleshooting and configuration. Before using it with any real device-control tool, confirm any setting changes, factory reset, or firmware-related action and make sure the device is stationary and safe.
Findings (1)
Artifact-based informational review of SKILL.md, metadata, install specs, static scan signals, and capability signals. ClawScan does not execute the skill or run runtime probes.
If a real integration or external tool is later used with these instructions, speed-limit changes or factory reset could alter device behavior or erase settings.
The skill describes changing vehicle parameters and performing a factory reset. These actions match the stated Ninebot integration purpose, but they can materially affect the device and should not be done without clear user intent.
配置车辆参数（速度限制、尾灯等设置） ... `九号重置` - 恢复出厂设置
Only perform configuration changes or resets after the user explicitly requests them, and confirm the target device and expected impact first.